Drills - page 158

Description: Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits ● Crimped steel wires ● Less aggressive than twist knot brushes ● Suitable for various metal preparation tasks ● Designed for use in a standard electric drill Specifications ● Diameter: 25mm ● Pack Quantity: 1. Stanley Crimped Steel Wire Cup Brush - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5035048375518

RRP: 7.12

Description: These Blue Spot Impact Socket Adaptors are manufactured from chrome vanadium steel for increased strength and durability. The adaptors have a 1/4in hex shank drive and are suitable for use with cordless screwdrivers and drills. A ball bearing helps secure the socket when in use. This 3 piece set contains 1/4in, 3/8in and 1/2in. Specification: Length: 150mm (6in) Additional Information: ● Type: Bit Holders/Adaptors ● Pack Qty.: 3 ● Size: Mixed Set. Blue Spot BlueSpot 3 Piece 1/4 Hex Long Reach Impact Socket Adaptor Set - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5028734141177

RRP: 9.14

Description: The Vitrex Premium Valved Moulded Power Tool & MDF Mask has a breathe-easy valve offering extra comfort when exerting greater physical effort/body movement. Ideal for working in confined positions (i. e when crouching or bending). Protects lungs against fine toxic particles. Ideal for use with MDF, softwoods, hardwoods, metals and concrete. Suitable for use with most power tools - drills, saws, grinders, sanders, routers etc. EN149:2001+A1:2009 FFP2 NR. This Vitrex Premium Valved Moulded Power Tool & MDF Mask is supplied as a single pack.

Category: DIY and tools

Description: A brad point drill bit has a centering tip for fast and accurate drilling. They give clean and precise holes when drilling through wood and wood-based materials. Features & Benefits ● Centering tip for accurate starting ● Chrome- vanadium alloyed steel for strength and durability ● Round shank for use with standard corded and cordless drills ● Suitable for general purpose use in soft or hard woods, laminates and chipboard Specifications ● Diameter: 10mm ● Length: 133mm. Stanley Brad Point Wood Drill Bit - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5035048371015

RRP: 4.66

Description: The LENOX® DIAMOND™ Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK™ Arbor. This LENOX® DIAMOND™ Holesaw has the following specification: Diameter: 51mm Fits SNAP-BACK™ Arbor: 2L, 6L Fits Standard Arbor: 2L, 3L, 6L, 7L.

Category: DIY and tools

Description: The LENOX® DIAMOND™ Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK™ Arbor. This LENOX® DIAMOND™ Holesaw has the following specification: Diameter: 25mm Fits SNAP-BACK™ Arbor: 5L Fits Standard Arbor: 1L, 4L, 5L.

Category: DIY and tools

Description: The LENOX® DIAMOND™ Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK™ Arbor. This LENOX® DIAMOND™ Holesaw has the following specification: Diameter: 29mm Fits SNAP-BACK™ Arbor: 5L Fits Standard Arbor: 1L, 4L, 5L.

Category: DIY and tools

Description: The LENOX® DIAMOND™ Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK™ Arbor. This LENOX® DIAMOND™ Holesaw has the following specification: Diameter: 32mm Fits SNAP-BACK™ Arbor: 2L, 6L Fits Standard Arbor: 2L, 3L, 6L.

Category: DIY and tools

Description: The LENOX® DIAMOND™ Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK™ Arbor. This LENOX® DIAMOND™ Holesaw has the following specification: Diameter: 35mm Fits SNAP-BACK™ Arbor: 2L, 6L Fits Standard Arbor: 2L, 3L, 6L.

Category: DIY and tools

Description: The LENOX® DIAMOND™ Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK™ Arbor. This LENOX® DIAMOND™ Holesaw has the following specification: Diameter: 57mm Fits SNAP-BACK™ Arbor: 2L, 6L Fits Standard Arbor: 2L, 3L, 6L, 7L.

Category: DIY and tools

Description: The LENOX® DIAMOND™ Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK™ Arbor. This LENOX® DIAMOND™ Holesaw has the following specification: Diameter: 68mm Fits SNAP-BACK™ Arbor: 2L, 6L Fits Standard Arbor: 2L, 3L, 6L, 7L.

Category: DIY and tools

Description: The LENOX® DIAMOND™ Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK™ Arbor. This LENOX® DIAMOND™ Holesaw has the following specification: Diameter: 76mm Fits SNAP-BACK™ Arbor: 2L, 6L Fits Standard Arbor: 2L, 3L, 6L, 7L.

Category: DIY and tools

Description: Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied with the correct drill bits for tapping. Contents held in plastic insert within steel storage case. Contents: 9 x metric coarse dies: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1 O/D 8 x metric fine dies: 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1.0, 10 x 1.25, 12 x 1.25 - 1 O/D 1 x BSP die 1/8 BSP 17 x metric taper taps: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1 O/D, 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1.0, 10 x 1.25, 12 x 1.25 - 1 O/D 17 x metric plug taps (bottoming): 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1 O/D, 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1.0, 10 x 1.25, 12 x 1.25 - 1 O/D 1 x taper tap 1/8 BSP 1 x tap wrench - American pattern 1/2 capacity 1 x 'T' type tap wrench 1/4 capacity 1 x die holder 1 O/D with guide 17 x HSS twist drills: 1.7, 2.5, 2.6, 2.9, 3.3, 3.5, 3.8, 4.2, 4.5, 5.0, 5.3, 6.8, 7.0, 8.5, 8.8, 10.3, and 10.7mm 1 x screw-pitch gauge 1 x screwdriver 1 x 1/8 BSP tap (bottoming). Draper 75 Piece Tap and Die Set - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5010559792054

RRP: 158.4

Description: They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications: ● Dia Metric: 15.9 ● Dia Imperial: 5/8 ● Dia 2 Metric: 6.35 ● Overall Length Metric: 102. Trend TCT Drill Countersink Size 12 5/8 - shop the best deal online on diy-compared.co.uk

Category: Power Tools

Delivery cost: 4.95

EAN: 5027654011904

MPN: 6200/12TC

RRP: 40.28

Description: They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications: ● Dia Metric: 12.7 ● Dia Imperial: 1/2 ● Dia 2 Metric: 3.96 ● Overall Length Metric: 75. Trend TCT Drill Countersink Size 6 1/2 - shop the best deal online on diy-compared.co.uk

Category: Power Tools

Delivery cost: 4.95

EAN: 5027654012048

MPN: 6200/6TC

RRP: 36.05

Description: They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications: ● Dia Metric: 15.9 ● Dia Imperial: 5/8 ● Dia 2 Metric: 5.55 ● Overall Length Metric: 90. Trend TCT Drill Countersink Size 10 5/8 - shop the best deal online on diy-compared.co.uk

Category: Power Tools

Delivery cost: 4.95

EAN: 5027654011881

MPN: 6200/10TC

RRP: 40.28

Description: They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications: ● Dia Metric: 15.9 ● Dia Imperial: 5/8 ● Dia 2 Metric: 4.76 ● Overall Length Metric: 85. Trend TCT Drill Countersink Size 8 5/8 - shop the best deal online on diy-compared.co.uk

Category: Power Tools

Delivery cost: 4.95

EAN: 5027654012062

MPN: 6200/8TC

RRP: 39.24

Description: They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications: ● Dia Metric: 12.7 ● Dia Imperial: 1/2 ● Dia 2 Metric: 3.2 ● Overall Length Metric: 65. Trend TCT Drill Countersink Size 4 1/2 - shop the best deal online on diy-compared.co.uk

Category: Power Tools

Delivery cost: 4.95

EAN: 5027654012024

MPN: 6200/4TC

RRP: 40.28

Description: Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications ● Milling Diameter: 23mm ● Shank Diameter: 25mm ● Length of Cut: 25.5mm ● Overall Length: 101.5mm ● Square End Helix Angle: 30°. Clarkson Cutting Tools Clarkson M42 2 Flute Screwed Shank Slot Drill 23mm - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5056293209830

MPN: 3012022300

RRP: 211.36

Description: Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications ● Milling Diameter: 22mm ● Shank Diameter: 25mm ● Length of Cut: 25.5mm ● Overall Length: 100mm ● Square End Helix Angle: 30°. Clarkson Cutting Tools Clarkson M42 2 Flute Screwed Shank Slot Drill 22mm - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5056293209823

MPN: 3012022200

RRP: 180.79