You are here: Home » Nails

Nails

Nails 121 to 150 of 1352 First | Previous | 3 | 4 | 5 | 6 | 7 | Next | Last
Magnify Metrotile Paslode Nails - Pack Of 2200
Metrotile Paslode Nails - Pack Of 2200

Metrotile Paslode Nails - Pack Of 2200


Brand: Metrotile
Description: Metrotile Paslode Nails - Pack of 2200 Fixing Metrotile roofing in place. Compatible with all profile types Key points A range of tile fixings Suitable for all Metrotile profile types Manufactured to the highest standards High quality screws and nails are available for all Metrotile application types. This will enable you to install a Metrotile profile with the correct size of nail, or screw, for a smoother installation. Our range of nails and screws for each profile includes
Delivery cost:
Review this product
 
Building Supplies Online
Review this store
Building Supplies Online
 
£106.10
 
Shop best deal
Magnify Metrotile Loose 50mm Nails 5kg - Black
Metrotile Loose 50mm Nails 5kg - Black

Metrotile Loose 50mm Nails 5kg - Black


Brand: Metrotile
Description: Metrotile Loose 50mm Nails 5kg - Black Fixing Metrotile roofing in place. Compatible with all profile types Key points A range of tile fixings Suitable for all Metrotile profile types Manufactured to the highest standards High quality screws and nails are available for all Metrotile application types. This will enable you to install a Metrotile profile with the correct size of nail, or screw, for a smoother installation. Our range of nails and screws for each profile includes
Delivery cost:
Review this product
 
Building Supplies Online
Review this store
Building Supplies Online
Product ID: 550
 
£61.87
 
Shop best deal
Magnify 16 Gauge Angled Nails 63mm For Dc618k Pack 2500
16 Gauge Angled Nails 63mm For Dc618k Pack 2500

16 Gauge Angled Nails 63mm For Dc618k Pack 2500


Brand: Tacwise
Description: 16 Gauge Angled Nails 63mm For DC618 K Pack 2500 16 Gauge Angle Finish Nails, compatible with: Tacwise Ranger 2 16 G Inclined Nailer ( Battery Powered) Paslode IM250 A Nailer DEWALT DC618 Nailer DEWALT DCN660 N Nailer Hitachi NT65 GA Nailer ( Amongst others, which accept 16 G Angled Nails)
Delivery cost: 5018505036504
Review this product
 
Building Supplies Online
Review this store
Building Supplies Online
Product ID: 773
 
£12.88
 
Shop best deal
Magnify Bostitch Sb16 Galvanised Straight Finish Nails
Bostitch Sb16 Galvanised Straight Finish Nails

Bostitch Sb16 Galvanised Straight Finish Nails


Category: Power Tools
Brand: Bostitch
Description: Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 16125
 
£4.55
 
Shop best deal
Magnify Bostitch Stick Nails Galvanised Pl Series
Bostitch Stick Nails Galvanised Pl Series

Bostitch Stick Nails Galvanised Pl Series


Category: Power Tools
Brand: Bostitch
Description: Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21 to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0. 000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 255050
 
£37.02
 
Shop best deal
Magnify Bostitch 21 Galvanised Ring Shank Stick Nails 2.5 X 50mm Pack Of 2 000
Bostitch 21 Galvanised Ring Shank Stick Nails 2.5 X 50mm Pack Of 2 000

Bostitch 21 Galvanised Ring Shank Stick Nails 2.5 X 50mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21 to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0. 000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 255050
 
£37.02
 
Shop best deal
Magnify Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000
Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000

Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21 to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0. 000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 285050
 
£38.93
 
Shop best deal
Magnify Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000
Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000

Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21 to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0. 000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 286550
 
£45.72
 
Shop best deal
Magnify Bostitch 21 Galvanised Ring Shank Stick Nails 2.5 X 55mm Pack Of 2 000
Bostitch 21 Galvanised Ring Shank Stick Nails 2.5 X 55mm Pack Of 2 000

Bostitch 21 Galvanised Ring Shank Stick Nails 2.5 X 55mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21 to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0. 000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 255550
 
£39.14
 
Shop best deal
Magnify Bostitch 21 Galvanised Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000
Bostitch 21 Galvanised Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000

Bostitch 21 Galvanised Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21 to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0. 000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Delivery cost: 5
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 319050
 
£77.99
 
Shop best deal
Magnify Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000
Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000

Bostitch 21 Galvanised Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21 to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0. 000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 287550
 
£50.18
 
Shop best deal
Magnify Arrow White Head Brad Nails 25mm Pack Of 2000
Arrow White Head Brad Nails 25mm Pack Of 2000

Arrow White Head Brad Nails 25mm Pack Of 2000


Category: Diy
Brand: Arrow
Description: Brad Nails to fit Arrow Staplers T50PBN, ET100 and ET200White Head Nails (Brads)2000 per packSize. 25mm (1 in)....
Delivery cost: 1.9500
EAN: 79055218166
Review this product
 
Tooled Up
Review this store
Tooled Up
Product ID: 226
 
£6.95
 
Shop best deal
Magnify Bostitch Clipped Head 28 Stick Nails Ww Series
Bostitch Clipped Head 28 Stick Nails Ww Series

Bostitch Clipped Head 28 Stick Nails Ww Series


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 28050
 
£16.64
 
Shop best deal
Magnify Bostitch 28 Bright Smooth Shank Nails 2.8 X 65mm Pack Of 2 000
Bostitch 28 Bright Smooth Shank Nails 2.8 X 65mm Pack Of 2 000

Bostitch 28 Bright Smooth Shank Nails 2.8 X 65mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 28065
 
£19.30
 
Shop best deal
Magnify Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000
Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000

Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 280658
 
£37.32
 
Shop best deal
Magnify Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000
Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000

Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 280508
 
£34.37
 
Shop best deal
Magnify Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000
Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000

Bostitch 28 Galvanised Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 280758
 
£38.72
 
Shop best deal
Magnify Bostitch 28 Galvanised Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000
Bostitch 28 Galvanised Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000

Bostitch 28 Galvanised Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 5
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 310908
 
£51.56
 
Shop best deal
Magnify Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000
Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000

Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 65mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 28065
 
£20.50
 
Shop best deal
Magnify Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000
Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000

Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 50mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 28050
 
£18.07
 
Shop best deal
Magnify Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000
Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000

Bostitch 28 Bright Ring Shank Stick Nails 2.8 X 75mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 28075
 
£19.32
 
Shop best deal
Magnify Bostitch 28 Bright Smooth Shank Stick Nails 3.1 X 90mm Pack Of 2 000
Bostitch 28 Bright Smooth Shank Stick Nails 3.1 X 90mm Pack Of 2 000

Bostitch 28 Bright Smooth Shank Stick Nails 3.1 X 90mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 5
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 31090
 
£25.52
 
Shop best deal
Magnify Bostitch 28 Bright Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000
Bostitch 28 Bright Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000

Bostitch 28 Bright Ring Shank Stick Nails 3.1 X 90mm Pack Of 2 000


Category: Power Tools
Brand: Bostitch
Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28 Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. ( Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not prote
Delivery cost: 5
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 31090
 
£27.71
 
Shop best deal
Magnify Onduline Profile Sheeting Nails 70mm Black Pk20
Onduline Profile Sheeting Nails 70mm Black Pk20

Onduline Profile Sheeting Nails 70mm Black Pk20


Category: Diy
Brand: Onduline
Description: Wickes stock a huge range of Nails for every possible DIY job or home improvement project.
Delivery cost: 7.95
EAN: 6007411033133
Review this product
 
Wickes
Review this store
Wickes
Product ID: 240025
 
£6.00
 
Shop best deal
Magnify Onduline Profile Sheeting Nails 70mm Black Pk100
Onduline Profile Sheeting Nails 70mm Black Pk100

Onduline Profile Sheeting Nails 70mm Black Pk100


Category: Diy
Brand: Onduline
Description: Wickes stock a huge range of Nails for every possible DIY job or home improvement project.
Delivery cost: 7.95
EAN: 6007411033157
Review this product
 
Wickes
Review this store
Wickes
Product ID: 240085
 
£18.00
 
Shop best deal
Magnify Onduline Profile Sheeting Nails 70mm Green Pk100
Onduline Profile Sheeting Nails 70mm Green Pk100

Onduline Profile Sheeting Nails 70mm Green Pk100


Category: Diy
Brand: Onduline
Description: Wickes stock a huge range of Nails for every possible DIY job or home improvement project.
Delivery cost: 7.95
EAN: 6007411033140
Review this product
 
Wickes
Review this store
Wickes
Product ID: 240089
 
£18.00
 
Shop best deal
Magnify Bostitch Bt13 Galvanised Brad Nails
Bostitch Bt13 Galvanised Brad Nails

Bostitch Bt13 Galvanised Brad Nails


Category: Power Tools
Brand: Bostitch
Description: BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails ( Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 13155
 
£9.26
 
Shop best deal
Magnify Tacwise 16 Gauge Angled Nails
Tacwise 16 Gauge Angled Nails

Tacwise 16 Gauge Angled Nails


Category: Hand Tools
Brand: Tacwise
Description: 16 gauge angle finish nails, which are compatible with: Tacwise Ranger 2 16 G Inclined Nailer ( Battery Powered). Paslode IM250 A Nailer. DEWALT DC618 Nailer. DEWALT DCN660 N Nailer. Hitachi NT65 GA Nailer. And all other nailers that take 16g angled nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 769
 
£9.80
 
Shop best deal
Magnify Tacwise 16 Gauge Angled Nails 63mm For Dc618k Pack 2500
Tacwise 16 Gauge Angled Nails 63mm For Dc618k Pack 2500

Tacwise 16 Gauge Angled Nails 63mm For Dc618k Pack 2500


Category: Hand Tools
Brand: Tacwise
Description: 16 gauge angle finish nails, which are compatible with: Tacwise Ranger 2 16 G Inclined Nailer ( Battery Powered). Paslode IM250 A Nailer. DEWALT DC618 Nailer. DEWALT DCN660 N Nailer. Hitachi NT65 GA Nailer. And all other nailers that take 16g angled nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 773
 
£15.74
 
Shop best deal
Magnify Tacwise 16 Gauge Angled Nails 45mm For Dc618k Pack 2500
Tacwise 16 Gauge Angled Nails 45mm For Dc618k Pack 2500

Tacwise 16 Gauge Angled Nails 45mm For Dc618k Pack 2500


Category: Hand Tools
Brand: Tacwise
Description: 16 gauge angle finish nails, which are compatible with: Tacwise Ranger 2 16 G Inclined Nailer ( Battery Powered). Paslode IM250 A Nailer. DEWALT DC618 Nailer. DEWALT DCN660 N Nailer. Hitachi NT65 GA Nailer. And all other nailers that take 16g angled nails.
Delivery cost: 3.49
Review this product
 
UK Tool Centre
Review this store
UK Tool Centre
Product ID: 771
 
£12.89
 
Shop best deal

Nails 121 to 150 of 1352 First | Previous | 3 | 4 | 5 | 6 | 7 | Next | Last