Easy Trim Easy-Trim Continuous Dry Verge Connector R Type Black
TO EXPLORE MORE
Price: £4.26
Brand: Easy Trim
Description: Easy-Trim Continuous Dry Verge Connector R Type Black To be used with our Continuous Dry Verge The Continuous Dry Verge Should be cut to the required length, allowing for a plumb cut at the ridge, and approximately 150mm longer than the rafter. The horizontal flange is cut away, to allow fitting over the felt support tray at the eaves. The battens are placed Against the lip of the water channel of the dry verge, which are the nailed into position directly through the horizontal fin of the verge. The nails are fixed Through both batten and verge, into the timber rafter. A close-up Of the roof battens in place show their posi-tion against the lip of the drainage channel. Once all the battens Are fixed place, and the Dry Verge secure, the roof is ready for tiling. Are fixed place, and the Dry Verge secure, the roof is ready for tiling. In the usual manner, ensuring that the verge tiles are fully inserted into the verge, where the top flange will hold them firmly in place At the eaves The verge should be cut square, flush to the lower tile. Stop ends are available for closing the eaves on the 'R' and 'D' profiles. The water channel Allows any rainwater to run directly into the rainwater gutter. The fitted Continuous Dry Verge Achieves a professional finish. This will be similar for any roof tile or slate being used. The completed roof Gives complete continuous cover against water penetration, and added strength from wind damage by securing end tiles firmly.
Category: DIY and tools
Merchant: Building Supplies Online
Product ID: CDV-RTYPE-CONN-B
