Description: nnnn Novia Reflex reflective breather membrane is an innovative reflective breather membrane designed to provide superior moisture resistance. It is an ideal breather membrane for all pitched cold and warm roofs and insulated wall applications.nn This high-quality, versatile, reflective breather membrane, when used in suitable constructions the membrane delivers improved R and andmu; values. It is lightweight and very easy to install. nn Novia reflex reflective roof and wall breather membrane is fully CE approved and CPR compliant. It also complies with EN 13501-1 fire classification grade E. nn Novia Reflex is a high-performance, multi-layer membrane made with 4-layer metallised polypropylene and microporous film laminate that features a highly reflective surface on one side, which helps to reflect radiant heat and reduce the overall heat load on your building.nn This reflective layer is combined with a highly breathable, waterproof membrane, which allows moisture to escape from the building while preventing water ingress from the outside.nn With its advanced moisture management capabilities, Novia Reflex helps to prevent the build-up of dampness and condensation within the building envelope. This can help to improve indoor air quality, reduce the risk of mould and mildew, and protect the structural integrity of your building over the long term.nn Key Features: nnn Multi-layer membrane with a reflective surface on one siden Highly breathable and waterproof membranen Novia reflex shows advanced moisture management capabilitiesn Easy to install in a wide range of applicationsn Improves energy efficiency, comfort, and durability of buildingsn Reflective surface reduces the heat load on a building and improves indoor air qualityn Protects structural integrity of buildings over the long term.n CE approved and CPR compliantnnn Applications: nn Novia reflex is designed for use in:nnn Insulated wall systemsn In all pitched cold and warm roof applicationsn In conventional cold roof applicationsn Suitable for zones 1-5 in the UK for BS 5534 wind uplift with tapennn Installation Guidance For Walls:nnn Fix Novia Reflex reflective breather membrane to the wall structure.n Ensure the upper layers overlap the lower layers with the reflective side facing outwards into the cavity.n Work from the bottom moving upwards. Allow for minimum overlaps of 100 mm on the horizontal joints.n Vertical laps should be at least 150 mm with no vertical lap joint within 300 mm of a corner.n Ensure the bottom timber is also protected by an overlap. nnn Installation Guidance For Roofs:nnn On insulated warm roofs, Novia Reflex may be placed directly onto the insulation or boarded roof if required.n Fix the membrane to the roof using galvanised nails, stainless staples or similar approved fixings while allowing upper and lower layer overlapping as shown within BS 5534:2014. Work from the bottom moving upwards. n All vertical overlaps must be situated on a rafter and must be sealed. Fix at suitable intervals that will be permanent.n At any entry points for services (soil pipes, vents etc.), or for pipe penetrations, ensure that Novia Reflex is properly sealed with Novia tape.n To comply with some BS 5534 wind uplift zone requirements use our single-sided Novia Breather Membrane Lap Tape. nnn Note: Non-Returnable. Returns and refunds are not applicable to this productn. Buy Insulation Online Novia Reflex - Reflective Breather Membrane - 1.5M x 50M - shop the best deal online on diy-compared.co.uk
Category: Hardware Building Materials Insulation