Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm

3.6 out of 5 stars
Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm
Zoom
 
SCROLL DOWN
TO EXPLORE MORE
 

Price: £75.95

Brand: Lindstrom

 

Description: The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved. Length (A): 108mm (4.25 in). Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part. Additional Information: ● Length: 108mm ● Soft Wire: 1.25mm. Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm - shop the best deal online on diy-compared.co.uk

 

Category: Hand Tools

Merchant: Tooled Up

Product ID: 5499

Delivery cost: 4.95

EAN: 7314150052554

MPN: 7291

RRP: 116.71

 
Tooled Up logo
 

My website utilises affiliate links when you click my 'Get the best deal now' buttons. If you buy something through one of these links, I may earn a little commission, at no extra cost to you.

 

I have relationships with many of the top online retailers (purchasing, shipping and returns will be handled directly by them) which enables me to offer the best deal online for the Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm and many other similar products - which will appear below, to enhance your online shopping experience.

 

For even more great deals on Lindstrom Hand Tools, click the link.

 

Author: Peter Whittle

Rating: 1

Review: Not as advertised! Product Description says: SPECIALLY FORGED BOX JOINT with extra long contact surfaces. This is actually made in 2 halves and fixed together as all cheapo tools were in the past with a single screw. Not what was advertised nor expecting from Lindstrom! Is this a counter fit version?

 

Author: Peter Whittle

Rating: 1

Review: Not as advertised! Product Description says: SPECIALLY FORGED BOX JOINT with extra long contact surfaces. This is actually made in 2 halves and fixed together as all cheapo tools were in the past with a single screw. Not what was advertised nor expecting from Lindstrom! Is this a counter fit version?

 

Similar Products

  • Lindstrom 7291 Supreme Oblique Cutting Nipper

    Price: £75.95

    Brand: Lindstrom

     
    3.6 out of 5 stars

    5 ratings

     

    Description: The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved. Length (A): 108mm (4.25 in). Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part. Additional Information: ● Length: 108mm ● Soft Wire: 1.25mm. Lindstrom 7291 Supreme Oblique Cutting Nipper - shop the best deal online on diy-compared.co.uk

    Category: Diy

    Delivery cost: 4.95

    EAN: 7314150052554

    RRP: 116.71

     
    My Tool Shed logo

    Merchant: My Tool Shed

    Product ID: 5499

     
  • Lindstrom 7190 Supreme Diagonal Cutting Nipper

    Price: £64.95

    Brand: Lindstrom

     
    4 out of 5 stars

    51 ratings

     

    Description: The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved. Length (A): 109mm (4.29 in). Blade length (B): 9mm (0.35 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width: (F): 1.0mm (0.04 in). Cutting capacity: 0.2-1.25mm. Head type: Tapered Cutting edge: Micro-bevel. The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult areas. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses. Additional Information: ● Length: 109mm ● Soft Wire: 1.25mm. Lindstrom 7190 Supreme Diagonal Cutting Nipper - shop the best deal online on diy-compared.co.uk

    Category: Diy

    Delivery cost: 4.95

    EAN: 7314150052479

    RRP: 97

     
    My Tool Shed logo

    Merchant: My Tool Shed

    Product ID: 5497

     
  • Lindstrom 7190 Supreme Diagonal Cutting Nipper 109mm

    Price: £64.95

    Brand: Lindstrom

     
    4 out of 5 stars

    51 ratings

     

    Description: The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved. Length (A): 109mm (4.29 in). Blade length (B): 9mm (0.35 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width: (F): 1.0mm (0.04 in). Cutting capacity: 0.2-1.25mm. Head type: Tapered Cutting edge: Micro-bevel. The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult areas. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses. Additional Information: ● Length: 109mm ● Soft Wire: 1.25mm. Lindstrom 7190 Supreme Diagonal Cutting Nipper 109mm - shop the best deal online on diy-compared.co.uk

    Category: Hand Tools

    Delivery cost: 4.95

    EAN: 7314150052479

    MPN: 7190

    RRP: 97

     
    Tooled Up logo

    Merchant: Tooled Up

    Product ID: 5497

     
  • Lindstrom 7890 Supreme Snipe Nose Pliers

    Price: £58.95

    Brand: Lindstrom

     
    4.6 out of 5 stars

    77 ratings

     

    Description: Lindstrom 7890 Supreme Flat Nose Pliers are produced from high performance tool steel. These holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved. The smooth jaws minimise the risk of damage and scratching surfaces. Length (A): 132mm (5.2 in). Jaw length (B): 32mm (1.26 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width (E): 1.2mm (0.05 in). Tip depth (F): 0.8mm (0.03 in). Additional Information: ● Type: Long Snipe ● Length: 132mm. Lindstrom 7890 Supreme Snipe Nose Pliers - shop the best deal online on diy-compared.co.uk

    Category: Diy

    Delivery cost: 4.95

    EAN: 7314150052691

    RRP: 87.77

     
    My Tool Shed logo

    Merchant: My Tool Shed

    Product ID: 5502

     
  • Lindstrom 7490 Supreme Flat Nose Pliers

    Price: £54.95

    Brand: Lindstrom

     
    4.4 out of 5 stars

    46 ratings

     

    Description: These Lindstrom Supreme Flat Nose Pliers are produced from high-performance tool steel. These holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved. The pliers' smooth jaws minimise the risk of damage and scratching to the wire. Length (A): 120mm (4.72in). Jaw length (B): 20mm (0.79in). Head width (C): 9mm (0.35in). Head depth (D): 6mm (0.24in). Tip width (E): 1.2mm (0.05in). Tip depth (F): 3.2mm (0.13in). Additional Information: ● Type: Flat ● Length: 120mm. Lindstrom 7490 Supreme Flat Nose Pliers - shop the best deal online on diy-compared.co.uk

    Category: Diy

    Delivery cost: 4.95

    EAN: 7314150052646

    RRP: 82.14

     
    My Tool Shed logo

    Merchant: My Tool Shed

    Product ID: 5501

     
  • Lindstrom 7890 Supreme Snipe Nose Pliers 132mm

    Price: £58.95

    Brand: Lindstrom

     
    4.6 out of 5 stars

    77 ratings

     

    Description: Lindstrom 7890 Supreme Flat Nose Pliers are produced from high performance tool steel. These holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved. The smooth jaws minimise the risk of damage and scratching surfaces. Length (A): 132mm (5.2 in). Jaw length (B): 32mm (1.26 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width (E): 1.2mm (0.05 in). Tip depth (F): 0.8mm (0.03 in). Additional Information: ● Type: Long Snipe ● Length: 132mm. Lindstrom 7890 Supreme Snipe Nose Pliers 132mm - shop the best deal online on diy-compared.co.uk

    Category: Hand Tools

    Delivery cost: 4.95

    EAN: 7314150052691

    MPN: 7890

    RRP: 87.77

     
    Tooled Up logo

    Merchant: Tooled Up

    Product ID: 5502

     
  • Lindstrom 7893 Supreme Snipe Nose Pliers 120mm

    Price: £56.95

    Brand: Lindstrom

     
    4.6 out of 5 stars

    27 ratings

     

    Description: Lindstrom 7893 Supreme Snipe Nose Pliers are produced from high performance tool steel. These snipe nose holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved. The smooth jaws minimise the risk of damage and scratching surfaces. Length (A): 120mm (4.72 in). Jaw length (B): 20mm (0.79 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width (E): 1.2mm (0.05 in). Tip depth (F): 0.8mm (0.03 in). Additional Information: ● Type: Short Snipe ● Length: 120mm. Lindstrom 7893 Supreme Snipe Nose Pliers 120mm - shop the best deal online on diy-compared.co.uk

    Category: Hand Tools

    Delivery cost: 4.95

    EAN: 7314150052769

    MPN: 7893

    RRP: 84.47

     
    Tooled Up logo

    Merchant: Tooled Up

    Product ID: 5504

     
  • Lindstrom 8140 Diagonal Cutting Micro Bevel Nippers

    Price: £54.95

    Brand: Lindstrom

     

    Description: These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications. Lindstrom Diagonal Cutting Size: 110mm. Type: Micro Bevel Nipper. Additional Information: ● Length: Soft Wire ● Medium/Hard Wire: Hard Wire ● 110mm: 0.2-1.25mm. Lindstrom 8140 Diagonal Cutting Micro Bevel Nippers - shop the best deal online on diy-compared.co.uk

    Category: Diy

    Delivery cost: 4.95

    EAN: 7314150050949

    RRP: 81.92

     
    My Tool Shed logo

    Merchant: My Tool Shed

    Product ID: 5505

     
  • Lindstrom 7490 Supreme Flat Nose Pliers 120mm

    Price: £54.95

    Brand: Lindstrom

     
    4.4 out of 5 stars

    46 ratings

     

    Description: These Lindstrom Supreme Flat Nose Pliers are produced from high-performance tool steel. These holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved. The pliers' smooth jaws minimise the risk of damage and scratching to the wire. Length (A): 120mm (4.72in). Jaw length (B): 20mm (0.79in). Head width (C): 9mm (0.35in). Head depth (D): 6mm (0.24in). Tip width (E): 1.2mm (0.05in). Tip depth (F): 3.2mm (0.13in). Additional Information: ● Type: Flat ● Length: 120mm. Lindstrom 7490 Supreme Flat Nose Pliers 120mm - shop the best deal online on diy-compared.co.uk

    Category: Hand Tools

    Delivery cost: 4.95

    EAN: 7314150052646

    MPN: 7490

    RRP: 82.14

     
    Tooled Up logo

    Merchant: Tooled Up

    Product ID: 5501

     
  • Lindstrom 8140 Diagonal Cutting Micro Bevel Nippers 110mm

    Price: £54.95

    Brand: Lindstrom

     

    Description: These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications. Lindstrom Diagonal Cutting Size: 110mm. Type: Micro Bevel Nipper. Additional Information: ● Length: Soft Wire ● Medium/Hard Wire: Hard Wire ● 110mm: 0.2-1.25mm. Lindstrom 8140 Diagonal Cutting Micro Bevel Nippers 110mm - shop the best deal online on diy-compared.co.uk

    Category: Hand Tools

    Delivery cost: 4.95

    EAN: 7314150050949

    MPN: 8140

    RRP: 81.92

     
    Tooled Up logo

    Merchant: Tooled Up

    Product ID: 5505