Leica Diy

Description: The Leica CLR104 telescopic staff is double sided with E graduation on the front and mm graduations on the reverse for accurate levelling functions. This staff is 5m in length when extended and folds down to only 1.2m for transport and storage. Additional Information: ● Type: Grade/Level Rod. Leica Geosystems CLR104 Telescopic Staff - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 15.95

EAN: 7640110692011

RRP: 117.6

Description: The Leica RVL 80 Line Receiver is suitable for finding red pulsed line laser beams over longer distances or in difficult light conditions. It can localise the laser beam at a distance of up to 80m. With optical and acoustic signals that help to find the laser plane. Supplied with a receiver holder for wider scope of use. Compatible with: LINO L2, L2+, L2P5, L360 and L4P1 Line Lasers. Additional Information: Type: Receiver. Leica Geosystems RVL 80 Line Receiver for Lino Laser Level - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 7640110696057

RRP: 129.6

Description: The Leica Geosystems CLR290 Floor to Ceiling Laser Pole is the ideal accessory for those using a self-levelling laser on a regular basis. It has been specifically designed for use with Leica's Lino range of cross line lasers. It can also be used with any other 1/4in or 5/8in thread rotating or line laser for reliable, precise levelling. To use simply extend to the required height, extends up to 290cm, and then fix into place using the attached pole clamps. Once done, attach your laser to the tripod thread and adjust the clamp to the desired beam height. Ideal for when a floor, shelf or similar object isn't a suitable mounting point and where a wall clamp simply won't do. Incredibly easy to use, very well built, with a 3 year no-quibble guarantee and a substantial holding weight of 45kg. Additional Information: ● Type: Pole. Leica Geosystems CLR290 Floor To Ceiling Pole - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 15.95

EAN: 7640110690659

RRP: 102.6

Description: The Leica Lino L2P5 projects a combination of long clear cross lines and points set at exact plumb or 90° angles. Easy to set-up, just switch on and the self levelling system compensates for up-to±4° allowing you to concentrate on the job in hand. With a simple two button operation you can switch between horizontal, vertical or cross line projection. The wide 180° aperture projects a long horizontal line which is perfect for levelling long areas or across multiple walls - for example when laying out a kitchen work surface. Pulsing line can be selected to increase the laser range with use of a line detector (Leica Reference LLD2) for long distance or outside operation. This also activates the power saving mode, reducing power consumption by 40%. The laser unit incorporates a lock function which protects the unit during transport and also allows the unit to project lines at an angle by tilting the unit. You can manually switch off the self-levelling using the lock function. The laser line can then be projected at any angle. Minor angular misalignments of±4° are compensated automatically. If the angular misalignment is greater, the device does not project any lines or dots. Functions: horizontal, vertical or cross line modes, plumb points, points at 90°, pulse function with power-saving mode, exact 90° angles. Supplied with: 1 x Target Plate, 1 x Magnetic Multifunction Adaptor, 4 x AA Batteries and 1 x Carrying Pouch. Specification Level Accuracy: Horizontal:± 1.5mm @ 5m, Vertical:± 0.75mm @ 3m line length. Self-Levelling Range: 4°± 0.5°. Working Range: 15m (30m with receiver). Power: 4 x AA Batteries 1.5V (Supplied). Dimensions (Hx Dx W): 118 x 131 x 76mm. Tripod Thread: 1/4in. Protection Class: IP54 rated, against splash & dust damage. Leica Geosystems Lino L2P5 Cross Line Self Levelling Laser Level - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 0

EAN: 7640110692639

RRP: 368.4