Stanley Bostitch Diy

Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. Gauge/Diameter (mm) 2.8 Length 75 28° Collation Angle SKU S280R75G8 Profile RING Finish G8 Description STICK NAIL 2.80-75 RING GAL8 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S Additional Information: ● Shank: Ring ● Size: 2.8 x 75mm ● Finish: Galvanised ● Pack Qty.: 2,000. Stanley Bostitch Bostitch 28 Degree Ring Galvanised Stick Nail 75mm Pack of 2000 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013010425

RRP: 102.22

Description: Galvanised finishing staples for use with Stanley Bostitch Pneumatic Finish Staplers. 1 x Pack of 800 SX5035-20 Finish Staples 20mm Additional Information: Size: 20mm Pack Qty.: 800. Stanley Bostitch Bostitch SX5035 Finish Staple Narrow Crown 20mm Pack of 800 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013900177

RRP: 4.15

Description: Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries. A Bulk Pack of 2,500 50 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 50 mm. Pack : Box of 2500. Additional Information: ● Type: Nails ● Size: 50mm ● Finish: Galvanised ● Pack Qty.: 2500. Stanley Bostitch Bostitch 16 Gauge Straight Finish Nails 50mm Pack of 2500 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013917199

RRP: 15.91

Description: Powerslam staples available in packs of 5,000, for use with the Powerslam Hand Tacker (BOSPC2K). Crown (mm) 10.0 Length 6 SKU STCR501906E Finish GALV Point CP Description STCR5019 STAPLE 6MM GALV 5M Qty per box 5000 Additional Information: Size: 6mm Pack Qty.: 5000. Stanley Bostitch Bostitch Staples for Powerslam Stapler - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013935261

RRP: 7.34

Description: Bostitch Stanox staples are also known as 84 series. For use with TU-216-84-E or other tools using 84 gauge. Wire gauge 0.5 mm x 1mm, 12.3mm crown staple with 14mm leg length. Additional Information: ● Size: 14mm ● Pack Qty.: 10,000. Stanley Bostitch Bostitch 84 Series Wide Crown Staple - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013937395

RRP: 20.54

Description: The Bostitch CPACK15 Combo Pack comes with everything you need to hook a Bostitch Pneumatic tool to a compressor. Contains: 1 x 15.5mm x 15m Air Hose. 1 x Pipe Thread Seal Tape. 1 x Bottle of Pneumatic Tool Oil. 1 x 6.3mm Female Pipe Thread Plug (FPT)1 x 6.3mm Male Pipe Thread Plug (MPT)1 x 6.3mm Female Pipe Thread Socket (FPT)1 x 6.3mm Male Pipe Thread Socket (MPT)1 x Blow Gun. Max Operating Pressure: 150 PSI, 10.5 Bar. Additional Information: ● Type: Hose Connectors. Stanley Bostitch Bostitch Air Hose and Connectors - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013900375

RRP: 108

Description: Galvanised finishing staples for use with Stanley Bostitch Pneumatic Finish Staplers. 1 x Pack of 800 SX5035-35 Finish Staples 35mm Additional Information: Size: 35mm Pack Qty.: 800. Stanley Bostitch Bostitch SX5035 Finish Staple Narrow Crown - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013900207

RRP: 6.88

Description: Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries. A Bulk Pack of 2,500 65 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 65 mm. Pack : Box of 2500. Additional Information: ● Type: Nails ● Size: 65mm ● Finish: Galvanised ● Pack Qty.: 2500. Stanley Bostitch Bostitch 16 Gauge Straight Finish Nails - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013917175

RRP: 20.62

Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. Gauge/Diameter (mm) 3.1 Length 9028° Collation Angle SKU S31090G8 Profile PLAIN Finish G8 Description STICK NAIL 3.10-90 PLAIN GAL8 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S Additional Information: ● Shank: Smooth ● Size: 3.1 x 90mm ● Finish: Galvanised ● Pack Qty.: 2,000. Stanley Bostitch Bostitch 28 Degree Galvanised Smooth Nail - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5902013010579

RRP: 106.02

Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. Gauge/Diameter (mm) 3.1 Length 90 28° Collation Angle SKU S310R90G8 Profile RING Finish G8 Description STICK NAIL 3.10-90 RING GAL8 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S Additional Information: ● Shank: Ring ● Size: 3.1 x 90mm ● Finish: Galvanised ● Pack Qty.: 2,000. Stanley Bostitch Bostitch 28 Degree Ring Galvanised Stick Nail - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5902013010708

RRP: 132.2

Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. Type : Ring. Length : 50mm. Pack : Box of 2000. Additional Information: ● Shank: Ring ● Size: 2.8 x 50mm ● Finish: Bright ● Pack Qty.: 2,000. Stanley Bostitch Bostitch 28 Degree Ring Stick Nail - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013010333

RRP: 46.43

Description: Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. Gauge/Diameter (mm) 3.1 Length 90 28° Collation Angle SKU S31090 Profile PLAIN Finish BRIGHT Description STICK NAIL 3.10-90 PLAIN 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S Additional Information: ● Shank: Smooth ● Size: 3.1 x 90mm ● Finish: Bright ● Pack Qty.: 2,000. Stanley Bostitch Bostitch 28 Degree Smooth Stick Nail - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5902013010555

RRP: 67.55

Description: High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer. 50mm Gauge/Diameter (mm) 15 Ga Box 1500 High Carbon Zinc Dichromate Suits: SB-HC50FN Additional Information: ● Type: Hardened Nails ● Size: 50mm. Stanley Bostitch Bostitch 15G Hardened Nails - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013922667

RRP: 39.17

Description: Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank, ensuring that their holding power is enhanced. Applications include partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. For use with N62FN-1, N62FNB-E & N62FNK-2 models. Note: This nail will also fit the N60FN and the N59FNK models. Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. 25° collation angle Type - 15 gauge angled finish nail. Finish - Galvanised. Length - 32mm. QTY - Box 3655. Additional Information: ● Type: Nails ● Size: 32mm ● Finish: Galvanised ● Pack Qty.: 3655. Stanley Bostitch Bostitch Angled Finish Nails 15 Gauge - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013917465

RRP: 28.3

Description: Flooring L Cleats for use with the Bostitch flooring nailer. L Cleat Finish: Galvanised L Cleat Length : 50mm Qty. Box 1000 Additional Information: ● Size: 50mm ● Pack Qty.: 1000. Stanley Bostitch Bostitch Flooring Nails - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 0077914026334

RRP: 33.85

Description: BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. Length : 25mm. Colour : Brown. Pack : Clam pack of 1000. Additional Information: Type: Brad Nails Size: 25mm. Stanley Bostitch Bostitch 18 Gauge Brad Nails - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013900030

RRP: 3.77

Description: Galvanised finishing staples for use with Stanley Bostitch Pneumatic Finish Staplers. 1 x Pack of 5000 SX503515 Finish Staples 15mm Additional Information: ● Size: 15mm ● Pack Qty.: 5000. Stanley Bostitch Bostitch SX5035 Finish Staple Narrow Crown 15mm Pack of 5000 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013935742

RRP: 15.6

Description: High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer. 20mm Gauge/Diameter (mm) 15 Ga Box 3000 High Carbon Zinc Dichromate Suits: SB-HC50FN Additional Information: ● Type: Hardened Nails ● Size: 20mm. Stanley Bostitch Bostitch 15G Hardened Nails 20mm Pack of 1500 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013923565

MPN: HCFN-20

RRP: 42.38

Description: High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer. 40mm Gauge/Diameter (mm) 15 Ga Box 1500 High Carbon Zinc Dichromate Suits: SB-HC50FN Additional Information: ● Type: Hardened Nails ● Size: 40mm. Stanley Bostitch Bostitch 15G Hardened Nails 40mm Pack of 1500 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013922674

MPN: HCFN-40

RRP: 37.45

Description: Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries. A Bulk Pack of 2,500 38 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 38 mm. Pack : Box of 2500. Additional Information: ● Type: Nails ● Size: 38mm ● Finish: Galvanised ● Pack Qty.: 2500. Stanley Bostitch Bostitch 16 Gauge Straight Finish Nails 38mm Pack of 2500 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5902013917212

RRP: 12.82