Bondloc Diy

Description: Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Specification: Resin: Dimethacrylate. Colour: Yellow. Cure Speed with Activator: <10 minutes. Cure Speed without Activator: <15 mins @ 20°C. Viscosity: >50,000 cps. Gap Fill: 0.05mm to 0.4mm. Flash Point: >100°C. Shelf Life: 12 months @ 20°C. Specific Gravity: 1.09. Max. Operating Temperature: +150°C. Cured Performance: Full Cure Time: 6-12 hours. Typical Breakaway Strength: >6 to <15 N/mm (2). Prevailing Torque: >3 to < 9 N/mm (2). Static Shear Strength: >5 to <15 N/mm (2). Size: 50ml. Additional Information: ● Type: Pipe Seal ● Size: 50ml. Bondloc B577 Fast Curing High Pressure Teflon Pipe Sealant - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5005775050057

RRP: 22.64

Description: Bondloc Flange Seal Type B515 is a purple, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Specifications: Colour: Dark Purple Paste Fixture Speed No Activator: Up to 12 hours. Fixture Speed With Activator: <2 hours. Viscosity: Paste. Gap fill: 0.5 mm. Flash point: >100°C. Shelf life: 12 months @ 20°C. Specific gravity: 1.10. Max operating temp: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours. Tensile strength: 8 N/mm(2). Static Shear strength: 12.5 N/mm(2). Size: 50ml. Additional Information: ● Type: Gasket Sealant ● Size: 50ml. Bondloc B515 Instant Low Pressure Gasket Sealant - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5005155050059

RRP: 20.28

Description: Bondloc B401 is a Medium Viscosity Cyanoacrylate. It bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylate Appearance: Clear, colourless Specific Gravity: 25°C 1.06 g/cm&sup 2; Shelf life: 12 months unopened Viscosity @ 25°C: 90 - 120 Size: 20g Additional Information: ● Type: Medium Viscosity ● Size: 20g. Bondloc B401 Medium Viscosity Cyanoacrylate Adhesive - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5004012040042

RRP: 22.46

Description: Bondloc B603 is an anaerobic formulation designed for direct use on as received parts such as those with protective films. It is an Oil tolerant retainer and is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance. Specifications: Resin: Mod. Methacrylate. Colour: Green. Cure speed: <15 mins @ 20°C. Viscosity: 125 cps. Gap fill: 0.1mm. Flash point: >85°C. Shelf life: 12 months @ 20°C. Specific gravity: 1.04. Max operating temp: -53°C to +150°C. Cured Performance: Full Cure Time: 24 hours. Static shear (degreased): 28 N/mm&sup 2;. Static shear (oiled film): 21 - 24 N/mm&sup 2;. Size: 50ml. Additional Information: ● Type: High Strength ● Size: 50ml. Bondloc B603 Oil Tolerant Retainer Compound 50ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5006035060069

MPN: B603-50

RRP: 31.8

Description: Bondloc B480 is a black rubber toughened Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylate Appearance: Black Opaque Liquid Specific Gravity: 25°C 1.06 g/cm&sup 2; Shelf life: 6 months unopened Viscosity @ 25°C: 350 - 450 m Pas Size: 20g Additional Information: ● Type: Medium Viscosity ● Size: 20g. Bondloc B480 Black Rubber Toughened Cyanoacrylate Adhesive 20g - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5004802040047

MPN: B480-20

RRP: 24.38

Description: Bondloc Flange Seal Type B515 is a purple, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Specifications: Colour: Dark Purple Paste Fixture Speed No Activator: Up to 12 hours. Fixture Speed With Activator: <2 hours. Viscosity: Paste. Gap fill: 0.5 mm. Flash point: >100°C. Shelf life: 12 months @ 20°C. Specific gravity: 1.10. Max operating temp: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours. Tensile strength: 8 N/mm(2). Static Shear strength: 12.5 N/mm(2). Size: 50ml. Additional Information: ● Type: Gasket Sealant ● Size: 50ml. Bondloc B515 Instant Low Pressure Gasket Sealant 50ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5005155050059

MPN: B515-50

RRP: 20.28

Description: Bondloc B401 is a Medium Viscosity Cyanoacrylate. It bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylate Appearance: Clear, colourless Specific Gravity: 25°C 1.06 g/cm&sup 2; Shelf life: 12 months unopened Viscosity @ 25°C: 90 - 120 Size: 20g Additional Information: ● Type: Medium Viscosity ● Size: 20g. Bondloc B401 Medium Viscosity Cyanoacrylate Adhesive 20g - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5004012040042

MPN: B401-20

RRP: 22.46

Description: Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases. It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses. Specifications: Resin: Dimethacrylate Colour: Green Fixture Speed No Activator: 10 min. Fixture Speed With Activator: 5 min. Viscosity: 500 cps Gap fill: 0.25mm Flash Point: >100°C Shelf Life: minimum 12 month Specific Gravity: 1.06. Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours. Cure Time with good % of final strength: 2 hours Typical Breakaway Strength DIN : 40 Nm (25/55) Typical Prevailing Strength DIN : 55 Nm (45/70) Typical Breakaway ISO 10964: 26 Nm (16/36) Typical Prevailing ISO 10964: 36 Nm (22/50) Bondloc Studlock High Strength Threadlocker Size: 50ml. Additional Information: ● Type: High Strength ● Size: 50ml. Bondloc B270 Studlock High Strength Threadlocking Sealant 50ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5002705020029

MPN: B270-10

RRP: 33.7

Description: Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222’s Anaerobic nature allows it to cure only when confined between metal parts. Applications include all small fasteners, where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners etc. Specifications: Resin: Dimethacrylate Colour: Purple White tint Cure speed with Activator: <15 mins @ 20°C Cure speed without Activator: 15 minutes Viscosity- Brookfield Sp 3 @ 20rpm: 1200 cps (thixo), Sp 3 @ 20rpm: 5000cps Gap Fill/Max Threadform: 0.5mm/M36 Flash Point: >100°C Shelf Life: 12 months @ 20°C Specific Gravity: 1.06 Cured performance: Full Cure Time: 12 hours @ 20°C Typical Strength: ISO 10964: 6 Nm M10’s Range of Strength: Breakaway: 4 Nm up to 12 Nm, Prevailing: 2 Nm up to 6 Nm DIN 54454 Breakloose: 10 Nm max 20 Nm DIN 54454 Prevailing: 6 Nm up to 20 Nm Bondloc Screwlock Low Strength Threadlocker Size: 50ml. Additional Information: ● Type: Low Strength ● Size: 50ml. Bondloc B222 Screwlock Low Strength Threadlocking Sealant 50ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5002225020028

MPN: B222-10

RRP: 33.71

Description: Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate. Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints. Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc. Specifications: Resin: Dimethacrylate. Colour: White paste. Cure speed with activator: Not recommended. Cure speed Without Activator: up to 60 hours. Viscosity Brookfield Sp 3 @ 20rpm: 20,000cps. Gap fill /Max threadform: 0.4 mm /M36. Flash Point: >85°C. Shelf Life: 36 months @ 20°C. Specific Gravity: 1.25. Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 60 hours. Typical breakaway strength: 6 N.m. Typical prevailing strength: 2 N.m. Size: 50ml. Additional Information: ● Type: Pipe Seal ● Size: 50ml. Bondloc B572 Pipeseal Slow Cure Sealant for Pipes and Fittings 50ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5005725050052

MPN: B572-50

RRP: 20.6

Description: Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases. It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses. Specifications: Resin: Dimethacrylate Colour: Green Fixture Speed No Activator: 10 min. Fixture Speed With Activator: 5 min. Viscosity: 500 cps Gap fill: 0.25mm Flash Point: >100°C Shelf Life: minimum 12 month Specific Gravity: 1.06. Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours. Cure Time with good % of final strength: 2 hours Typical Breakaway Strength DIN : 40 Nm (25/55) Typical Prevailing Strength DIN : 55 Nm (45/70) Typical Breakaway ISO 10964: 26 Nm (16/36) Typical Prevailing ISO 10964: 36 Nm (22/50) Bondloc Studlock High Strength Threadlocker Size: 10ml. Additional Information: ● Type: High Strength ● Size: 10ml. Bondloc B270 Studlock High Strength Threadlocking Sealant 10ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5002701020023

MPN: B270-10

RRP: 7.48

Description: Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Specification: Resin: Dimethacrylate. Colour: Yellow. Cure Speed with Activator: <10 minutes. Cure Speed without Activator: <15 mins @ 20°C. Viscosity: >50,000 cps. Gap Fill: 0.05mm to 0.4mm. Flash Point: >100°C. Shelf Life: 12 months @ 20°C. Specific Gravity: 1.09. Max. Operating Temperature: +150°C. Cured Performance: Full Cure Time: 6-12 hours. Typical Breakaway Strength: >6 to <15 N/mm (2). Prevailing Torque: >3 to < 9 N/mm (2). Static Shear Strength: >5 to <15 N/mm (2). Size: 50ml. Additional Information: ● Type: Pipe Seal ● Size: 50ml. Bondloc B577 Fast Curing High Pressure Teflon Pipe Sealant 50ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5005775050057

MPN: B577-50

RRP: 22.64

Description: Bondloc B574 is an Instant Gasket material that forms in place, making almost any size and shape, replacing paper, cork etc. It eliminates relaxation and on loads loss. The assembled parts are usually suitable for immediate Low Pressure (6 bar) service and once cured can resist 350 Bar Pressure depending on gap size. Suitable for all formed in place applications such as gear box sealing, pump flanges, transmission assemblies, cover plates on tanks, cam shaft sealing, bearing gaps, outer housings, crank case and sump assemblies and flange pipe fittings. Specifications: Resin: Dimethacrylate. Colour: Orange paste. Cure speed with Activator: 10 mins. Cure speed without Activator: 15-30 mins. Viscosity - Brookfield Sp 3 @ 20rpm: 50,000cps. Gap Fill/Max Threadform: 0.5mm/M36. Flash Point: >100°C. Shelf Life: 12 months @ 20°C. Specific Gravity: 1.10. Max operating temperature: -55°C to 150°C. Cured Performance: Full Cure Time: 24 hours @ 20°C. Breakloose Strength: 8N.m. Static Shear Strength: 10N.m. Size: 50ml. Additional Information: ● Type: Gasket Maker ● Size: 50ml. Bondloc B574 Fast Curing Instant Gasket Compound 50ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5005745050056

MPN: B574-50

RRP: 21.83

Description: Bondloc B454 is a Thixotropic Non-Drip Gel Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylate Appearance: Clear, colourless Specific Gravity: 25°C 1.1 g/cm&sup 2; Shelf life: 12 months unopened Viscosity @ 25°C: Gel Size: 20g Additional Information: ● Type: Non-Drip ● Size: 20g. Bondloc B454 Thixotropic Non Drip Cyanoacrylate Adhesive Gel 20g - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5004542040048

MPN: B454-20

RRP: 24.82

Description: Bondloc B415 is a high viscosity Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylate Appearance: Clear, colourless Specific Gravity: 25°C 1.06 g/cm&sup 2; Shelf life: 12 months unopened Viscosity @ 25°C: 1200 - 1800 Size: 20g Additional Information: ● Type: High Viscosity ● Size: 20g. Bondloc B415 Hi Viscosity Cyanoacrylate Adhesive 20g - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5004152040049

MPN: B415-20

RRP: 24.38

Description: Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. It will secure all types and sizes of bearings, shafts and cylindrical parts which will require disassembly in the future. It is medium strength and is colour-coded yellow for job identification. Specifications: Resin: Mod. Dimethacrylate. Colour: Yellow. Fixture Speed No Activator: 10-15 mins. Fixture Speed With Activator: <5 mins. Viscosity: 400-800 cps. Gap fill: 0.2 mm. Flash Point: >100°C. Shelf Life: 12 month min. Specific Gravity: 1.06. Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours. Static shear strength: 12N/mm&sup 2;.ISO 10123 pin/collars range: 1-16 N/mm(&sup 2;). Bondloc Bearing Fit Retaining Compound. Size: 10ml. Additional Information: ● Type: Medium Strength ● Size: 10ml. Bondloc B641 Bearing Fit Retainer Compound 10ml - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5006411060065

MPN: B641-10

RRP: 7.48

Description: Bondloc B454 is a Thixotropic Non-Drip Gel Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylate Appearance: Clear, colourless Specific Gravity: 25°C 1.1 g/cm&sup 2; Shelf life: 12 months unopened Viscosity @ 25°C: Gel Size: 20g Additional Information: ● Type: Non-Drip ● Size: 20g. Bondloc B454 Thixotropic Non Drip Cyanoacrylate Adhesive Gel - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5004542040048

RRP: 24.82

Description: Bondloc B415 is a high viscosity Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylate Appearance: Clear, colourless Specific Gravity: 25°C 1.06 g/cm&sup 2; Shelf life: 12 months unopened Viscosity @ 25°C: 1200 - 1800 Size: 20g Additional Information: ● Type: High Viscosity ● Size: 20g. Bondloc B415 Hi Viscosity Cyanoacrylate Adhesive - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5004152040049

RRP: 24.38

Description: Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. It will secure all types and sizes of bearings, shafts and cylindrical parts which will require disassembly in the future. It is medium strength and is colour-coded yellow for job identification. Specifications: Resin: Mod. Dimethacrylate. Colour: Yellow. Fixture Speed No Activator: 10-15 mins. Fixture Speed With Activator: <5 mins. Viscosity: 400-800 cps. Gap fill: 0.2 mm. Flash Point: >100°C. Shelf Life: 12 month min. Specific Gravity: 1.06. Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours. Static shear strength: 12N/mm&sup 2;.ISO 10123 pin/collars range: 1-16 N/mm(&sup 2;). Bondloc Bearing Fit Retaining Compound. Size: 10ml. Additional Information: ● Type: Medium Strength ● Size: 10ml. Bondloc B641 Bearing Fit Retainer Compound - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5006411060065

RRP: 7.48

Description: Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress. It is a cylindrical parts supplement, suited to structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit. Specifications: Resin: Urethane Acrylate. Colour: Green. Fixture Speed No Activator: 5 mins. Fixture Speed With Activator: <5 mins. Viscosity: 2500 cps. Gap fill: 0.2mm. Flash Point: >85°C. Shelf Life: 12 months min. Specific Gravity: 1.08. Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 24 hours. Static shear strength: 30 N/mm&sup 2;. Bondloc High Strength Retaining Compound. Size: 50ml. Additional Information: ● Type: High Strength ● Size: 50ml. Bondloc B638 High Strength Retainer Compound - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 5006385060061

RRP: 33.7