Graf Diy

Description: Klaro E Professional sewage treatment plants by Graf are always a good choice. They are flexibly adapted to meet the stricter discharge values in water protection areas. No live parts need to be installed in the Klaro E Professional. Movement processes are created by three air lift pumps that are operated using a compressor which is built into the control. The Graf Klaro E Professional wastewater treatment system does not need consistent integration of live technology in the tank. Klaro E Professional sewage treatment plant can be flexibly adjusted to changing conditions by altering the cycle times. The air pressure holes are colour coded to avoid installation errors; the whole system just needs to be fitted to the baffle of the reservoir. Graf Klaro E Professional Sewage Treatment Plant Features & Benefits No live technology in the reservoir Air compressor is very durable and whisper-quiet Flexible, as expandable Can be switched to holiday mode Easy to install Low maintenance 10-year warranty on sewage reservoirs 2-year warranty on technology. Graf Klaro E Professional Sewage Treatment Plant 14 Person with Cast Iron Lid G50144 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50144

MPN: G50144

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 9 Person with Pedestrian Lid G50004 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50004

MPN: G50004

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 9 Person with Cast Iron Lid G50005 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50005

MPN: G50005

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 7 Person With Pedestrian Lid G50002 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50002

MPN: G50002

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 7 Person with Cast Iron Lid G50003 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50003

MPN: G50003

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 5 Person with Pedestrian Lid G50000 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50000

MPN: G50000

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 5 Person with Cast Iron Lid G50001 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50001

MPN: G50001

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 18 Person with Pedestrian Lid G50010 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50010

MPN: G50010

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 18 Person with Cast Iron Lid G50011 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50011

MPN: G50011

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 14 Person with Pedestrian Lid G50008 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50008

MPN: G50008

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 14 Person with Cast Iron Lid G50009 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50009

MPN: G50009

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 10 Person with Pedestrian Lid G50006 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50006

MPN: G50006

Description: The One 2 Clean sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container. Graf One2Clean Sewage Treatment Plant 10 Person with Cast Iron Lid G50007 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50007

MPN: G50007

Description: The One 2 Clean Plus sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean Plus sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean Plus packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Plus Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container More advanced control panel than the standard One 2 Clean Control panel allows additional plug in retro fitting of add on systems. Graf One2Clean Plus Sewage Treatment Plant 9 Person with Pedestrian Lid G50016 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50016

MPN: G50016

Description: The One 2 Clean Plus sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean Plus sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean Plus packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Plus Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container More advanced control panel than the standard One 2 Clean Control panel allows additional plug in retro fitting of add on systems. Graf One2Clean Plus Sewage Treatment Plant 9 Person with Cast Iron Lid G50017 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50017

MPN: G50017

Description: The One 2 Clean Plus sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean Plus sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean Plus packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Plus Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container More advanced control panel than the standard One 2 Clean Control panel allows additional plug in retro fitting of add on systems. Graf One2Clean Plus Sewage Treatment Plant 7 Person with Pedestrian Lid G50014 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50014

MPN: G50014

Description: The One 2 Clean Plus sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean Plus sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean Plus packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Plus Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container More advanced control panel than the standard One 2 Clean Control panel allows additional plug in retro fitting of add on systems. Graf One2Clean Plus Sewage Treatment Plant 7 Person with Cast Iron Lid G50015 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50015

MPN: G50015

Description: The One 2 Clean Plus sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean Plus sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean Plus packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Plus Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container More advanced control panel than the standard One 2 Clean Control panel allows additional plug in retro fitting of add on systems. Graf One2Clean Plus Sewage Treatment Plant 5 Person with Pedestrian Lid G50012 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50012

MPN: G50012

Description: The One 2 Clean Plus sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean Plus sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean Plus packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Plus Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container More advanced control panel than the standard One 2 Clean Control panel allows additional plug in retro fitting of add on systems. Graf One2Clean Plus Sewage Treatment Plant 5 Person with Cast Iron Lid G50013 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50013

MPN: G50013

Description: The One 2 Clean Plus sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One 2 Clean Plus sewage treatment plants do require a power source and requires emptying approximately every year. The water discharged from the One 2 Clean Plus packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields. Graf One 2 Clean Plus Sewage Treatment Plant Process Untreated waste enters the One 2 Clean tank via the inlet on the side. Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process. Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance. Aeration is then stopped allowing the activated waste to sink to the bottom. Compressed air is sent through the One 2 Clean tank once again, extracting the cleaned water near the surface. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions Numerous companiescan dispose of the waste, these must be a registered waste carrier Features & Benefits One tank with just one chamber Less energy consumption No mechanical elements in the wastewater No pumps in the wastewater No electrical components in the wastewater Incredibly low volume of sewage sludge Odourless, clear treated water for extraction State-of-the-art manufacturing for maximum stability 100% watertight and corrosion-resistant Can be installed in groundwater Simple maintenance via an integrated, self-cleaning sampling container More advanced control panel than the standard One 2 Clean Control panel allows additional plug in retro fitting of add on systems. Graf One2Clean Plus Sewage Treatment Plant 18 Person with Pedestrian Lid G50022 - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery time: 10-15 Working Days

Delivery cost: 0.00

Model number: G50022

MPN: G50022