Jeld Wen Diy And Tools - page 2

Description: The Atherton traditional 4 panel design interior door is great for sound reducing and is ready for the final finishing coat. Traditional 4 panel design Sound reducing White primed finish, ready for final finishing coat Traditional and contemporary design option available Glazed, bi-fold and fire door options available Undercoating option available 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 762mm Height: 1981mm Thickness: 35mm Technical Information Material composition: The standard core is hollow with one lock block to one side of the door for lock or latch fixing. This product is generally used in domestic situations. The weight is approximately 13kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. Een each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Primed Internal Door - 1981mm x 762mm (78 inch x 30 inch) Jeld Wen 26ATH - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 26ATH

Description: The Atherton traditional 4 panel design interior door is great for sound reducing and is ready for the final finishing coat. Traditional 4 panel design Sound reducing White primed finish, ready for final finishing coat Traditional and contemporary design option available Glazed, bi-fold and fire door options available Undercoating option available 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 838mm Height: 1981mm Thickness: 35mm Technical Information Material composition: The standard core is hollow with one lock block to one side of the door for lock or latch fixing. This product is generally used in domestic situations. The weight is approximately 13kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. Een each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Primed Internal Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen 29ATH - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 29ATH

Description: The Atherton traditional 4 panel design interior door is great for sound reducing and is ready for the final finishing coat. Traditional 4 panel design Sound reducing White primed finish, ready for final finishing coat Traditional and contemporary design option available Glazed, bi-fold and fire door options available Undercoating option available 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 726mm Height: 2040mm Thickness: 40mm Technical Information Material composition: The standard core is hollow with one lock block to one side of the door for lock or latch fixing. This product is generally used in domestic situations. The weight is approximately 13kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. Een each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Primed Internal Door - 2040mm x 726mm (80.3 inch x 28.6 inch) Jeld Wen 726ATH - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 726ATH

Description: The Atherton internal moulded white primed door is a popular smooth panelled door with an enhanced bead profile to provide a traditional look. 4 panel contemporary style internal door Smooth faced design White primed finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 686mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Primed Internal FD30 Fire Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen 23ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 23ATHF

Description: The Atherton internal moulded white primed door is a popular smooth panelled door with an enhanced bead profile to provide a traditional look. 4 panel contemporary style internal door Smooth faced design White primed finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 762mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Primed Internal FD30 Fire Door - 1981mm x 762mm (78 inch x 30 inch) Jeld Wen R26ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: R26ATHF

Description: The Atherton internal moulded white primed door is a popular smooth panelled door with an enhanced bead profile to provide a traditional look. 4 panel contemporary style internal door Smooth faced design White primed finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 686mm Height: 1981mm Thickness: 44mm Width: 762mm Height: 1981mm Thickness: 44mm Width: 838mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Primed Internal FD30 Fire Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen R29ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: R29ATHF

Description: The Atherton features a traditional 4 panel design and comes in a variety of finishes. Traditional 4 panel design Sound reducing Undercoated Traditional and contemporary design option available Glazed, bi-fold and fire door options available 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 686mm Height: 1981mm Thickness: 35mm Technical Information Material composition: The standard core is hollow with one lock block to one side of the door for lock or latch fixing. This product is generally used in domestic situations. The weight is approximately 13kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen W23ATH - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W23ATH

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 457mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 457mm (78 inch x 18 inch) Jeld Wen W16ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W16ATHF

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 610mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 610mm (78 inch x 24 inch) Jeld Wen W20ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W20ATHF

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 686mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen W23ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W23ATHF

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 762mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off t he floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 762mm (78 inch x 30 inch) Jeld Wen W26ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W26ATHF

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 838 mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen W29ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W29ATHF

Description: The Atherton internal moulded white primed door is a popular smooth panelled door with an enhanced bead profile to provide a traditional look. Smooth 4 panelled contemporary design White primed finish, ready for final finishing coat Traditional and contemporary design option available Glazed, bi-fold and fire door options available Semi-solid core to give a sturdy feel and reduce noise from room to room 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 762mm Height: 1981mm Thickness: 35mm Technical Information Material composition: A semi-solid core gives a sturdier feel than the standard hollow core option, which provides a far greater fixing area for ironmongery and a heavier feel. The weight is approximately 15kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton Middleweight 4 Panel White Primed Internal Door - 1981mm x 762mm (78 inch x 30 inch) Jeld Wen 26ATHSL - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 26ATHSL

Description: The Atherton internal moulded white primed door is a popular smooth panelled door with an enhanced bead profile to provide a traditional look. Smooth 4 panelled contemporary design White primed finish, ready for final finishing coat Traditional and contemporary design option available Glazed, bi-fold and fire door options available Semi-solid core to give a sturdy feel and reduce noise from room to room 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 838mm Height: 1981mm Thickness: 35mm Technical Information Material composition: A semi-solid core gives a sturdier feel than the standard hollow core option, which provides a far greater fixing area for ironmongery and a heavier feel. The weight is approximately 15kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton Middleweight 4 Panel White Primed Internal Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen 29ATHSL - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 29ATHSL

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. Smooth 4 panelled contemporary design White undercoated finish, ready for final finishing coat Traditional and contemporary design option available Glazed, bi-fold and fire door options available Semi-solid core to give a sturdy feel and reduce noise from room to room 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 686mm Height: 1981mm Thickness: 35mm Technical Information Material composition: A semi-solid core gives a sturdier feel than the standard hollow core option, which provides a far greater fixing area for ironmongery and a heavier feel. The weight is approximately 15kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton Middleweight 4 Panel White Undercoated Internal Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen W23ATHSL - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W23ATHSL

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. Smooth 4 panelled contemporary design White undercoated finish, ready for final finishing coat Traditional and contemporary design option available Glazed, bi-fold and fire door options available Semi-solid core to give a sturdy feel and reduce noise from room to room 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 762mm Height: 1981mm Thickness: 35mm Technical Information Material composition: A semi-solid core gives a sturdier feel than the standard hollow core option, which provides a far greater fixing area for ironmongery and a heavier feel. The weight is approximately 15kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton Middleweight 4 Panel White Undercoated Internal Door - 1981mm x 762mm (78 inch x 30 inch) Jeld Wen W26ATHSL - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W26ATHSL

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. Smooth 4 panelled contemporary design White undercoated finish, ready for final finishing coat Traditional and contemporary design option available Glazed, bi-fold and fire door options available Semi-solid core to give a sturdy feel and reduce noise from room to room 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 838mm Height: 1981mm Thickness: 35mm Technical Information Material composition: A semi-solid core gives a sturdier feel than the standard hollow core option, which provides a far greater fixing area for ironmongery and a heavier feel. The weight is approximately 15kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton Middleweight 4 Panel White Undercoated Internal Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen W29ATHSL - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W29ATHSL

Description: These moulded interior doors are available in traditional and contemporary designs and the 4-panel, glazed internal door has a smooth finish that will brighten up any home. Traditional panel design White primed finish, ready for final finishing coat Clear Glazed 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 762mm Height: 1981mm Thickness: 35mm Technical Information Material composition: The standard core is hollow with one lock block to one side of the door for lock or latch fixing. This product is generally used in domestic situations. The weight is approximately 13kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton White Primed Clear Glazed Internal Door - 1981mm x 762mm (78 inch x 30 inch) Jeld Wen 26APATH+GCF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 26APATH+GCF

Description: The Bostonian contemporary 6 panel design is fully finished and ready to hang. Contemporary 6 panel design Woodgrain textured finish Pre-painted ready to hang, saving you time at home on finishing. Traditional and contemporary design option available Bi-fold, glazed and fire door options available 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 686mm Height: 1981mm Thickness: 35mm Technical Information Material composition: The standard core is hollow with one lock block to one side of the door for lock or latch fixing. This product is generally used in domestic situations. The weight is approximately 13kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Bostonian 6 Panel Fully Finished White Internal Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen 23BTN+P - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 23BTN+P

Description: The Bostonian contemporary 6 panel design is fully finished and ready to hang. Contemporary 6 panel design Woodgrain textured finish Pre-painted ready to hang, saving you time at home on finishing. Traditional and contemporary design option available Bi-fold, glazed and fire door options available 10-year guarantee FSC Certified Manufactured in the UK Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces. Dimensions Width: 838mm Height: 1981mm Thickness: 35mm Technical Information Material composition: The standard core is hollow with one lock block to one side of the door for lock or latch fixing. This product is generally used in domestic situations. The weight is approximately 13kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Bostonian 6 Panel Fully Finished White Internal Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen 29BTN+P - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 29BTN+P