Moore and Wright Hand Tools - page 2

Description: The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS /INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery. The MAW11030DBL calipers have the following specifications: Range: 0-300mm (0-12in). Resolution: 0.01mm (0.005in). Jaws: 60mm. Additional Information: ● Size: 300mm (12in). Moore and Wright Digital Vernier Caliper 300mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102100940

MPN: 110-30DB

RRP: 207.24

Description: The Moore & Wright Water Resistant Series Digital Calliper are fitted with a patented ceramic capacitive sensor and a large LCD display that offers 4-way measurement (mm/inch, absolute/incremental measurement). They can be zeroed at any point on the scale and is fitted with a conveniently located on/off switch. The callipers are manufactured to DIN 862 standards and water and dust resistant to IP54 specifications. Supplied with a CR2032 battery. Specification: Range: 0-150mm (0-6in). Resolution: 0.01mm (0.0005in). Jaws: 40mm. Additional Information: Size: 150mm (6in). Moore and Wright Water Resistant Digital Vernier Caliper 150mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102100957

MPN: 110-15WR

RRP: 95.5

Description: The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main, cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute. The Moore & Wright ELM Engineer's Levels has the following specification: Length: 300mm (12in). Width: 36mm (1.42in). Height: 58mm (2.28in). Resoultion: 0.3mm per metre (0.0035in per foot). Additional Information: ● Size: 310mm (12in) ● Resolution: 0.3mm (0.0035in). Moore and Wright ELM Engineers Spirit Level 12 / 30cm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 0

EAN: 5051102049911

MPN: ELM

RRP: 308.15

Description: The Moore & Wright Spring Joint Internal Calipers are manufactured from polished tool steel. Their bow spring ensures uniform tension over the working range. The adjustment screw is centrally mounted. These spring joint internal calipers conform to BS3123 standards. The Moore & Wright 513R Spring Joint Internal Caliper has the following specification: Size: 75mm (3in). Additional Information: Type: Internal Size: 75mm (3in). Moore and Wright Spring Joint Internal Caliper 75mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102005139

MPN: 513R

RRP: 30.48

Description: The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length. The Moore & Wright 33118 Firm Joint Outside Calipers have the following specification: Size: 450mm (18in). Additional Information: ● Type: External ● Size: 450mm (18in). Moore and Wright Firm Joint Outside Caliper 450mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102043285

MPN: 33118

RRP: 187.6

Description: The Moore & Wright CSM Precision Rules are fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of reading and long life. Theseare rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12). The Moore & Wright CSRME24 is a 600mm/24in rule is perfect for use with the combination sets and is graduated on both sides. Measurements: Metric Graduations: in 0.5mm, numbered every 10mm. Imperial Graduations: 32nds and 64ths numbered every 1/8in. PLEASE NOTE This is ONLY the Rule. Additional Information: ● Type: Rule ● Size: 600mm/24in. Moore and Wright Imperial Rule for Combination Set 24 - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 7.95

EAN: 5051102051921

MPN: CSRME24

RRP: 106.33

Description: The Moore & Wright Spring Joint External Calipers have a bow spring that ensures uniform tension over the working range. They have a centrally mounted adjustment screw that offers a finer setting than firm joint type calipers. These spring joint external calipers conform to BS3123 standards. The Moore & Wright 526R Spring Joint External Calipers have the following specification: Size: 150mm (6in). Additional Information: Type: External Size: 150mm (6in). Moore and Wright Spring Joint External Caliper 150mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102037031

MPN: 526R

RRP: 33.86

Description: The Moore & Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in. Resolution: 0.001mm/.00005in. Additional Information: Type: External Imperial/Metric: Metric & Imperial Range: 0-25mm/0-1in Graduation: 0.001mm/0.00005in. Moore and Wright MW200-01DBL Digital External Micrometer 0mm - 25mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102200169

MPN: 20001DBL

RRP: 110.39

Description: The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS /INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery. The MAW11020DBL calipers have the following specifications: Range: 0-200mm (0-8in). Resolution: 0.01mm (0.005in). Jaws: 50mm. Additional Information: Size: 200mm (8in). Moore and Wright Digital Vernier Caliper 200mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102100933

MPN: 110-20DB

RRP: 128.68

Description: The Moore & Wright CSM Precision Sets are supplied with a rule (graduated both sides), Protractor head, Square head and Centre head. The datum faces are fully hardened and ground to resist wear. There is a centrally mounted protractor vial allows unrestricted viewing and the protractor has full 360° scale plate, graduated 0° - 180° - 0°. The protractor is also fitted with a satin chrome scale plate. The precision rules have been fully hardened and tempered with deeply etched graduations on both sides for ease of reading and long life. It has a unique rule clamp that allows positive location and clamping and a clipped corner on rule to maximise capability Square Head offers the following fixed angles: 15°, 30°, 45°, 60°, 75° and 90°. Centre Head offers a fixed 90° angle, for finding the centre of round bar stock up to 120mm diameter. MAWCSRM600 & MAWCSRME24 are rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12). The Moore & Wright CSME12 Precision Combination Set is a full set including 300mm/12in rule (graduated both sides), Protractor head, Square head and Centre head. Measurements: Metric graduations: in 0.5mm, numbered every 10mm. Imperial graduations: 32nds and 64ths numbered every 1/8in. Additional Information: ● Type: Combination Set ● Size: 300mm/12in. Moore and Wright Imperial Precision Combination Set 12 - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 0

EAN: 5051102055523

MPN: CSME12

RRP: 321.7

Description: The Moore & Wright 100 Series Vernier Calipers have a standard workshop model design. They are made of hardened alloyed stainless steel and have a chromed scale with engraved graduations. The calipers allow 4-way measurement and the measuring surface is micro-lapped. The calipers are manufactured to DIN 862 standards. Supplied in a plastic box. The MAW10020BI calipers have the following specifications: Range: 0-200mm (0-8in). Resolution: 0.02mm (0.001in). Additional Information: Graduations: 0.02mm (0.001in) Size: 200mm (8in). Moore and Wright Vernier Caliper 200mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102012274

MPN: 100-20BI

RRP: 41.99

Description: The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head, a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901, 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards. The Moore & Wright Internal Micrometer 901M Internal Micrometer has the following specification: Range: 25-55mm. Head Range: 5mm. Additional Information: Type: Internal Imperial/Metric: Metric Range: 25-55mm Graduation: 0.01mm. Moore and Wright 901M Internal Micrometer 25mm - 55mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 0

EAN: 5051102036744

MPN: 901M

RRP: 209.95

Description: The Moore & Wright Spring Joint Internal Calipers are manufactured from polished tool steel. Their bow spring ensures uniform tension over the working range. The adjustment screw is centrally mounted. These spring joint internal calipers conform to BS3123 standards. The Moore & Wright 514R Spring Joint Internal Caliper has the following specification: Size: 100mm (4in). Additional Information: Type: Internal Size: 100mm (4in). Moore and Wright Spring Joint Internal Caliper 100mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102017798

MPN: 514R

RRP: 30.48

Description: The Moore & Wright Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in plastic pocket case. The 1965M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm. Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm. Resolution: 0.001mm. Additional Information: Type: External Imperial/Metric: Metric Range: 0-25mm Graduation: 0.01mm. Moore and Wright 1965M Traditional External Micrometer 0mm - 25mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102058562

MPN: 1965M

RRP: 67.04

Description: The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS /INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery. The MAW11015DBL calipers have the following specifications: Range: 0-150mm (0-6in). Resolution: 0.01mm (0.005in). Jaws: 40mm. Supplied retail packed and in a plastic pouch. Additional Information: Size: 150mm (6in). Moore and Wright Digital Vernier Caliper 150mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102222109

MPN: W110-15DB

RRP: 72.47

Description: The Moore & Wright 100 Series Vernier Calipers have a standard workshop model design. They are made of hardened alloyed stainless steel and have a chromed scale with engraved graduations. The calipers allow 4-way measurement and the measuring surface is micro-lapped. The calipers are manufactured to DIN 862 standards. Supplied in a plastic box. The MAW10015BI calipers have the following specifications: Range: 0-150mm (0-6in). Resolution: 0.02mm (0.001in). Additional Information: Graduations: 0.02mm (0.001in) Size: 150mm (6in). Moore and Wright Vernier Caliper 150mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102067984

MPN: 100-15BI

RRP: 29.8

Description: The Moore & Wright Firm Joint Jenny Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The leg which holds the round adjustable hardened point is offset and model 341 has a locating spur on the straight leg. The sizes listed are the effective leg length which is measured from the joint assembly. Note: firm joint caliper capacities are generally 1/3 greater than the effective leg length. The Moore & Wright 341R Firm Joint Jenny Caliper has the following specification: Size: 125mm (5in). Additional Information: Type: Firm Joint Size: 125mm (5in). Moore and Wright Firm Joint Jenny Caliper 125mm - shop the best deal online on diy-compared.co.uk

Category: Hand Tools

Delivery cost: 4.95

EAN: 5051102046149

MPN: 341R

RRP: 22.21