Rust Oleum Diy - page 2

Description: 1610 X1 e Xcellent Multi-Purpose spray is a general purpose lubrication fluid that protects and cleans metal and plastic parts. The X1 e Xcellent Multi-Purpose spray is reinforced with Boro Tec X™, an excellent penetrating fluid with anti-corrosive and water repellent and displacing properties. It leaves a protective film layer after use. X1 e Xcellent Multi-Purpose spray is H1 compliant, and approved for incidental food contact. Main Properties: Good penetrating and lubricating properties - stops squeaking - creeping properties - water repellent - corrosion preventive - protects, cleans and degreases - does not contain silicon - dissolves grease, tar, oil and adhesives. Recommended Uses: Lubricating cables, chains, locks, switches and contacts - protection of metal surfaces against rust - removes oil, grease, wax, and leaves a protection film after cleaning - protection of electrical terminals from moisture and corrosion - displaces water in automotive ignition circuits and contacts - free-loosen rusted parts - will helps to remove adhesive labels - can be used as stainless steel cleaner. Specifications: Size: 500 ml Appearance: Transparent Colour: Transparent Operating temperature: -30°C to +145°C. Rust Oleum X1 eXcellent Multi Purpose Lubrication Spray - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 8715743018374

RRP: 9.56

Description: RUST-OLEUM® Combi Color Satin Metal spray paint is primer and topcoat in one, based on a urethane modified alkyd, providing good drying properties at low temperatures. The product contains rust-inhibitive pigments and is lead- and chromate free. Recommended Uses: Should be applied on bare, manually derusted or with Combi Primer Anti-Corrosion 3369/3380 primed steel. Offers corrosion protection in a light industrial environment. For metal structures in a more aggressive industrial environment, prior application of a RUSTOLEUM Combi Primer Anti-Corrosion 3369/3380 is recommended. Specifications: Size: 400 ml Appearance: High gloss, Satin Colour: Satin White Satin and High gloss are also available as tint base. Density: High gloss/flat: 1.07 kg/l. ± 0.09 depending on colour Satin: 1,22 kg/l. ± 0,10 depending on colour Solids Content: High gloss/flat: 54.6% by volume ± 2.0 depending on colour Satin: 50,6 volume % ± 2,0 depending on colour Viscosity: High gloss/flat: 100 - 104 KU /Krebs Stormer Units at 20°C Satin: 86 - 91 KU /Krebs Stormer Units bij 20°C Recommended film thickness: 55 ìm dry, equals 100 ìm wet VOC-content: 439 g/l max. Ready-to-use mixture: 495 g/l max. Category: A/i EU Limit values: 600 g/l (2007) /500 g/l (2010) Drying times:20°C/50% r.h. - To touch: 2 hours /To handle: 8 hours /To recoat: After 16 hours /Full hardness: 7 days 10°C/60% r.h. - To touch: 3 hours /To handle: 16 hours /To recoat: After 24 hours /Full hardness: 14 days 30°C/50% r.h. - To touch: 1 ½ hours /To handle: 6 hours /To recoat: After 8 hours /Full hardness: 5 days Heat resistance: 90°C (dry heat), at elevated temperatures discoloration may occur. Coverage:,/b. Theoretical: 10.3 m²/l at 55 ìm dry, depending on colour. Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Rust Oleum CombiColor Satin Metal Spray Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: Satin White

EAN: 8715743013409

RRP: 13.98

Description: RUST-OLEUM® Combi Color Metal 7300/7400 coating is primer and topcoat in one, based on a urethane modified alkyd, providing good drying properties at low temperatures. The product contains rust-inhibitive pigments and is lead- and chromate free. Recommended Uses: Should be applied on bare, manually derusted or with Combi Primer Anti-Corrosion 3369/3380 primed steel. Combi Color Metal is intended for brush and roller application and can also be applied by air spray. Offers corrosion protection in a light industrial environment. For metal structures in a more aggressive industrial environment, prior application of a RUSTOLEUM Combi Primer Anti-Corrosion 3369/3380 is recommended. Specifications: Size: 2.5 litre Appearance: High gloss, Satin (black and white), Flat (black and white). Colour: Satin White Satin and High gloss are also available as tint base. Density: High gloss/flat: 1.07 kg/l. ± 0.09 depending on colour Satin: 1,22 kg/l. ± 0,10 depending on colour Solids Content: High gloss/flat: 54.6% by volume ± 2.0 depending on colour Satin: 50,6 volume % ± 2,0 depending on colour Viscosity: High gloss/flat: 100 - 104 KU /Krebs Stormer Units at 20°C Satin: 86 - 91 KU /Krebs Stormer Units bij 20°C Recommended film thickness: 55 ìm dry, equals 100 ìm wet VOC-content: 439 g/l max. Ready-to-use mixture: 495 g/l max. Category: A/i EU Limit values: 600 g/l (2007) /500 g/l (2010) Drying times:20°C/50% r.h. - To touch: 2 hours /To handle: 8 hours /To recoat: After 16 hours /Full hardness: 7 days 10°C/60% r.h. - To touch: 3 hours /To handle: 16 hours /To recoat: After 24 hours /Full hardness: 14 days 30°C/50% r.h. - To touch: 1 ½ hours /To handle: 6 hours /To recoat: After 8 hours /Full hardness: 5 days Heat resistance: 90°C (dry heat), at elevated temperatures discoloration may occur. Coverage: Theoretical: 10.3 m²/l at 55 ìm dry, depending on colour. Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Rust Oleum CombiColor Satin Metal Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: Satin White

EAN: 8715743013119

RRP: 67.91

Description: RUST-OLEUM® Hard Hat Aerosols 7715 and 7778 are heat resistant coatings based on a silicone modified alkyd resin. The products are based on lead- and chromate free pigments. Recommended Uses: Should be used on new, bare steel, blasted steel or light rusted steel surfaces or properly prepared painted substrates alike barbecue grills, fire place equipment, space heaters etc. Intended for small maintenance jobs or for touch-up. RUST-OLEUM Hard Hat 7778 provide heat resistance up to 750°C (= 1380°F) dry heat (short term peak resistance) in sheltered or interior environments. Specifications: Size: 500 ml Appearance: Satin gloss Colour: Black Propellant: Dimethyl ether Recommended film thickness: 25 ìm dry, equals 100 ìm wet VOC-content: 640 g/l Drying times: 20°C/50% r.h. To touch: 1 hour To handle: 3 hours To recoat: Within hour or after 48 hours Full hardness: 24 hours after minimum service temperature of 150°C has been reached Gradually heat the coating to 150°C (max. 50°C/hour). Heat resistance: Standard 600°C (dry heat) Short term peak resistance 750°C (dry heat) Coverage: Theoretical: 2 m² per spray can at 25 ìm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Rust Oleum Hard Hat Heat Resistant Spray Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: Black

EAN: 8715743006203

RRP: 19.84

Description: RUST-OLEUM® HARD HAT Aerosol 2990 Stainblocker is a matt white high-pigmented coating based on a plasticized acrylic resin for the permanent isolation of problem stains from nicotine, soot, tar and rust and the effects of moisture, graffiti and a numerous other colourings. Recommended Uses: Renovation paint which can be applied directly on ceilings, plaster, cement, wood, concrete, wallpaper, isolation walls, old paints, etc. Can be used as topcoat or can be recoated with standard wall paints. Specifications: Size: 500 ml Appearance: Matt Colour: White Propellant: Propane/Butane VOC-content: 538 g/l Drying times 20°C/50% r.h. Tack free: 5 minutes To recoat: Wet in wet /after ½ hour Full hardness: 24 hours Coverage: Theoretical: 2,1 m² per aerosol at 30 µm dry Practical coverage depends on many factors such as roughness of the substrate and material losses during application. Rust Oleum 2990 Stain Blocker Matt Spray Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: White

EAN: 8715743008313

RRP: 12.16

Description: RUST-OLEUM® Hard Hat Aerosols Fluorescent Topcoats 2200 Series are based on a fast drying acrylic resin. The products are based on special fluorescent pigments and are lead- and chromate free. Recommended Uses: Should be applied over RUST-OLEUM Hard Hat 2190 Flat White; for exterior applications it is recommended to recoat Fluorescent Topcoats 2200 with RUST-OLEUM Hard Hat 2500 Clear. Intended for safety marking or signalling. Should be used in light industrial exposures, normal humidity and interior applications. Specifications: Size: 500 ml Appearance: Flat/fluorescent Colour: Fluorescent Red Propellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 653 g/l Drying times 20°C/50% r.v. To touch: 15 minutes To handle: 30 minutes To recoat: After 1 hour Full hardness 3 days Heat resistance: 100°C (dry heat) Coverage: Theoretical: 2.1 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Rust Oleum Hard Hat Fluorescent Spray Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: Red

EAN: 8715743006265

RRP: 21.89

Description: RUST-OLEUM® Hard Hat Aerosol Zinc Spray Cold Galvanising Compound 2185 is a fast drying zinc rich primer based on an epoxy ester resin. The product contains pure zinc as pigment and provides cathodic protection. Recommended Uses: Should be used on new, bare steel or galvanised steel surfaces. Intended to be applied on small areas or for touch up. Can be recoated with non-saponifiable coatings. Should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. Specifications: Size: 500 ml Appearance: Flat Colour: Grey Propellant: Dimethyl ether Recommended film thickness: 35 µm dry, equals averagely 100 µm wet VOC-content: 630 g/l Drying times:20°C/50% r.v: To touch: 10 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness: 7 days Heat resistance: 450°C (dry heat) Coverage: Theoretical: 1.4 m² per spray can at 35 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Rust Oleum Hard Hat Galvanising Zinc Spray Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: Galv Express

EAN: 8715743005893

RRP: 21.06

Description: RUST-OLEUM® Hard Hat Aerosol Galva Expresse 2180 is a very fast drying zinc rich primer based on a styrene-acrylic resin. The product contains pure zinc as pigment and provides excellent protection against corrosion. Recommended Uses: Should be used on new, bare steel or galvanised steel surfaces. Intended to be applied on small areas or for touch-up. Can be recoated with non-saponifiable coatings. Should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. Specifications: Size: 500 ml Appearance: Flat Propellant: Dimethyl ether Recommended film thickness: 35 µm dry, equals 100 µm wet VOC-content: 645 g/l Drying times 20°C/50% r.v. To touch: 5 minutes To handle: 10 minutes To recoat: Within 1 hour or after 48 hours Full hardness: 3 days Heat resistance: 350°C (dry heat) Coverage: Theoretical: 1.4 m² per spray can at 35 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Rust Oleum Hard Hat Galva Express Primer Metal Spray Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: Galvanizing Zinc

EAN: 8715743005886

RRP: 19.02

Description: RUST-OLEUM® Hard Hat Aerosol Galva-Plus Silver 2120 is a fast drying zinc/aluminium coating based on an epoxy ester resin. The product contains pure zinc and aluminium as pigment. Recommended Uses: Should be used for touch-up of galvanised steel surfaces. Intended to be applied on small areas or for touch-up. Should be used as a single coat in light industrial exposures and corrosive environments. Specifications: Size: 500 ml Appearance: Flat Colour: Silver metallic Propellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals 100 µm wet VOC-content: 655 g/l Drying times: 20°C/50% r.v. To touch: 15 minutes To handle: 60 minutes To recoat: Within 2 hours or after 48 hours Full hardness: 7 days Heat resistance: 150°C (dry heat) Coverage: Theoretical: 1.7 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Rust Oleum Hard Hat Galva Plus Metal Spray Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: Silver

EAN: 8715743005916

RRP: 19.02

Description: RUST-OLEUM® Hard Hat Aerosols Zinc Aluminium Spray Bright Galvanizing 2117 is a fast drying zinc rich primer/topcoat based on an epoxy ester resin. The product contains pure zinc and aluminium as pigment and provides cathodic protection. Recommended Uses: Should be used on damaged galvanized steel surfaces. Intended to be applied on small areas or for touch-up. Should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas. Specifications: Size: 500 ml Appearance: Flat Colour: Aluminium Propellant: Dimethyl ether Recommended film thickness: 35 µm dry, equals 115 µm wet VOC-content: 647 g/l Drying times:20°C/50% r.v: To touch: 20 minutes To handle: 60 minutes To recoat: Within 2 hours or after 48 hours Full hardness 7 days Heat resistance: 450°C (dry heat) Coverage: Theoretical: 1.2 m² per spay can at 35 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Rust Oleum Hard Hat Galva Zinc Metal Spray Paint - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

Colour: Zinc Aluminium

EAN: 8715743005909

RRP: 21.06

Description: Effective, concentrated biodegradable cleaner to quickly clean all types of surfaces prior to painting. Features & Benefits ● Multi-surface cleaner for walls, window/door frames, floors and metals ● No further rinsing is needed after wiping the surface; saves time ● Effortlessly removes all organic and inorganic pollution ● Makes the surface anti-static to prevent adhesion of dust prior to painting ● Non-foaming, biodegradable formulation ● Improves adhesion on pre-painted surfaces Specifications ● Size: 1 Litre. Rust Oleum Pre-Paint Cleaner 1l - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 4.95

EAN: 5413436010386

MPN: 2904.1

RRP: 11.61

Description: The Rust Oleum Comfort Spray Pistol Grip accessory is an ergonomic tool which enables extended aerosol application with minimal fatigue; It also helps to keep the operator's hands clean from spray.

Category: Diy

Delivery cost: 4.95

EAN: 020066164539

RRP: 10.69

Description: Powdered repair product on cement base and resins for inside and outside use. For leveling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork. Specifications ● Density: 1,6 ● Mixing Ratio: Powder : Water = 5kg : 1L ● Dry to recoat: 2 days ● Fully cured: 1 month Features & Benefits ● For levelling and repairing cracks and holes ● Traffic allowed after 24 hours ● Recoatable after 48 hours ● Includes trowel Contents ● Rust Oleum Concrete Repair Mortar (10kg) ● Trowel. Rust Oleum Epoxy Concrete Repair Mortar 10kg - shop the best deal online on diy-compared.co.uk

Category: Diy

Delivery cost: 7.95

EAN: 8715743015250

MPN: 203012.10

RRP: 101.97

Description: A non shrink solvent-free liquid crack filler for concrete floors (two part epoxy). Suitable for repairing fine cracks up to 3mm wide. A package of 500 ml fills a crack of 2mm wide and 5mm deep over approximately 25 linear metres (due to variations in crack depth and width it is only possible to give a guideline figure). Features & Benefits ● Solvent-free Epoxy (2-part) ● For repairing fine cracks up to 3 mm wide ● Dry in 3-4 hours ● Provides approximately 25 linear metres of coverage (on 2mm wide, 5mm deep cracks) Contents ● Rust Oleum Fine Crack Repair Mortar 500ml.

Category: Diy

Delivery cost: 7.95

EAN: 8715743015243

MPN: 203010.0.5

RRP: 46.78