Ironmongery - page 31

Description: JB Kind City Black Painted Tinted Glass Glazed Internal Door The JB Kind City Black Painted Tinted Glass Glazed Internal Door is a perfect choice for the discerning buyer looking to stay on top of interior design trends. Featuring a stunning appearance derived from warehouse and factory conversions, this industrial style door really appeals to contemporary tastes and crafts an ideal visual contribution to any art deco home. Designed to mimic the sturdy steel doors of old, the JB Kind City range retains that timeless traditional panelled aesthetic but modernises, domesticates and improves upon it through the use of more natural materials used in the construction - reflecting the value that we place on being environmentally conscious where we can. The luxurious black painted finish compliments a wide range of interior palettes, enhancing neutral colours or breaking up and framing vast white spaces for example. You will be spoiled for choice with the versatile shade on this panel door. A sense of sophistication and privacy is provided by the darker tint of the glass, while also allowing some natural light to spread and illuminate separated rooms. High-quality MDF wood manufacturing allows this black door to be lightweight yet durable in its own right as well as more affordable and much easier to install than an actual steel door. JB Kind provide a 2-year guarantee against any manufacturing defects, underlining their confidence in a long-lasting and truly worthy line of products. Additional Features Robust solid core construction frames the glazing Fully finished and ready to hang Features solid wood lock block for extra secure fittings Specialist ironmongery not required Can be fitted with standard door handles and hardware Suitable for JB Kind's pocket door system Minimal trimming (2 - 3mm) recommended to avoid negating the warranty, except: 10mm trimming allowance on bottom rail Available Sizes 1981 x 762 x 35mm (78 x 30in).

Category: DIY and tools

Description: Fire Essential's 76mm Euro Profile Stainless Steel Sashlocks with Intumescent Pads and 70mm Euro Profile Cylinder and Thumb Turn are essential for any stainless steel hardware designs that are fitted into bathrooms and other areas that require that extra bit of privacy. Many fire-rated ironmongery products require intumescent to be fitted as standard (to validate the Certifire certification). To install, fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. When the hinges shown as being CE Marked are included in a fire-resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. To install, fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third-Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance. Kit Contents 1 x 76mm BS Euro Profile Sashlock (SS) 1 x 75mm x 105mm Universal BS Intumescent kit to suit 76mm sashlock lock with backset and strike plate 1 x 70mm Euro Profile Cylinder with Thumb Turn Features & Benefits Stainless steel Fire tested to BS476 part 22 and BS EN1634 FD30/60 Fire Rated CE marked Product Specification Sash Lock: 76mm Intumescent Kit: 75mm x 105mm Thumb Turn: 70mm. Fire Essentials 76mm Euro Profile Stainless Steel Sashlock with Intumescent Pad and 70mm Euro Profile Cylinder and Thumb Turn L1C1 - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 2-3 Working Days

Delivery cost: 9.00

Delivery weight: 1kg

Colour: Stainless Steel

MPN: L1C1

Description: The JELD-WEN External Softwood Unfinished Paint Grade Solid Door is made of softwood and is unfinished allowing you to add your own finish to create your own style to your home. This JELD-WEN External Softwood Unfinished Paint Grade Solid Door is ready to be stained, varnished or painted. It is recommended to finish the door on both faces and on all four sides. IT is important to sand down the edges for a smooth finish. The JELD-WEN External Softwood Unfinished Paint Grade Solid Door has a standard core which makes it lighter than other doors with a solid core. This JELD-WEN External Softwood Unfinished Paint Grade Solid Door is perfect for homes and offices, it is a perfect addition to any sheltered environments. There are a variety of different handles that you can add onto the JELD-WEN External Softwood Unfinished Paint Grade Solid Door for a unique and contemporary finish. JELD-WEN are the UK's largest manufacturer of quality timber interior and exterior doors. JELD-WEN have an enviable reputation built on guaranteed quality, performance and reliability and with all of their products sustainably produced, you know you are buying a quality door that will last. An economical solution for home, office or light commercial use - ideally for in sheltered environments. It is essential that the door is completely finished on the two faces and all FOUR edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually, 3 top coats are satisfactory but we strongly recommend that you treat this door in accordance with the paint manufacturer | ??™s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. With a great range of door styles to choose from, we are sure you will find the perfect doors for your home. Additional Resources How to Paint, Varnish & Stain a Door Door Sizes Guide Our Guide for Door Finishes Different Types of Door Cores Additional Information Material: Softwood Finish: Unfinished, ready to stain or paint Core type: Standard Core Veneer: Paint Grade veneer Trimming: 4mm on the 2 long edges and 6mm on the bottom edge Recommended ironmongery: 3x External hinges Part M: 838mm doors comply with Mobility Part M building regulations.

Category: DIY and tools

Description: JB Kind Metro White Painted Clear Glazed Internal Door The JB Kind Metro White Painted Clear Glazed Internal Door is a perfect choice for the discerning buyer looking to stay on top of interior design trends. Featuring a stunning appearance derived from warehouse and factory conversions, this industrial style door really appeals to contemporary tastes and crafts an ideal visual contribution to any art deco home. Designed to echo the sturdy steel doors of old, the JB Kind Metro range maintains that timeless traditional ladder aesthetic but modernises, domesticates and improves upon it by way of the natural materials used in the construction - representing the importance that we place on being environmentally conscious where possible. The luxurious white painted finish is capable of enhancing a wide range of interior palettes, enhancing neutral colours or breaking up and framing vast black spaces for example. You will be spoiled for choice with the versatile shade of this panel door. The clear glass panes allow you to spread natural light and warmth between rooms while saving on energy bills and making your home feel more spacious and welcoming. A high-quality MDF wood build allows this black door to be lightweight yet durable in its own right as well as more affordable and much easier to install than an actual steel door. JB Kind offer a 2-year guarantee against any manufacturing defects, underlining their confidence in a long-lasting and truly worthy line of products. Additional Features Robust solid core construction Features solid wood lock block for extra secure fittings Individual glass panes are more stable than single pane glazing Specialist ironmongery not required Can be fitted with standard door handles and hardware Suitable for JB Kind's pocket door system Minimal trimming (2 - 3mm) recommended to avoid negating the warranty, except: 10mm trimming allowance on bottom rail Available Sizes 1981 x 686 x 35mm (78 x 27in) 1981 x 762 x 35mm (78 x 30in) 1981 x 838 x 35mm (78 x 33in).

Category: DIY and tools

Description: JELD-WEN Internal White Moulded Unfinished Rockport Door JELD-WEN is the UK's largest manufacturer of quality timber doors, and they have a fantastic reputation for guaranteed quality, performance and reliability and all of their products are sustainably produced. When buying with JELD-WEN, you know you are purchasing a quality door that will last and at a wallet-friendly price too. Online with us, there is an extensive range of door styles to choose from, so you are sure to find the perfect doors for your home. The JELD-WEN Internal White Moulded Unfinished Rockport Door is a lightweight timber door, with a modern panel styled design. The JELD-WEN Internal White Moulded Unfinished Rockport Door comes unfinished with a base coat primer, so you have the choice to keep it white for a brighter look or paint it with a colour to match your home. These JELD-WEN Internal White Moulded Unfinished Rockport Door are available in traditional and contemporary designs with complementing glazed, bi-fold and fire door options. JELD-WEN products have a 10 Year Manufacturer's Guarantee. Our Standard Rockport interior door features five horizontal panels that provide a classic look for your interiors. Each panel has a deep border that produces clear lines and a contemporary take on traditional designs. With a smooth white finish, you can hang this door as it comes or makes it your own with a splash of colour. It is essential that the door is completely finished on the two faces and all FOUR edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually, 3 top coats are satisfactory but we strongly recommend that you treat this door in accordance with the paint manufacturer's instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. With a great range of door styles to choose from, we are sure you will find the perfect doors for your home. Material: White Moulded Finish: Unfinished, ready to stain or paint Core type: Lightweight Core Panels: 5 panels Trimming: Up to 4mm from each side and 6mm from the bottom FSC Certified: The timber used in this product is FSC Certified Recommended ironmongery: 3x internal hinges Part M: 838mm doors comply with Mobility Part M building regulations.

Category: DIY and tools

Description: Hiatt Hardware Victorian Straight Lever Lock Door Handle - Chrome This lock door handle is an excellent choice of ironmongery for all types of internal door. It is a classic design that would be suitable in any home. This popular product has some great features including a low maintenance anti-corrosion finish which only requires cleaning with a soft cloth now and then. Constructed in zinc using Zamak Construction gives the Hiatt Hardware Victorian Straight Lever Lock Door Handle - Chrome long-term durability; it is guaranteed mechanically for 100,000 cycles, based on 10 years of 27 daily cycles. The door plate of this handle measures 152 x 42mm. For fitting, this handle can be combined with a 63mm 3 or 5 lever sash lock which is available separately in a similar finish. The Hiatt Hardware Victorian Straight Lever Lock Door Handle - Chrome is supplied as a pair for a single door and comes with spindle and fixing screws. Our range of Hiatt Lever Lock Door Handles are designed to complement your home decor. Our collection includes a great choice of designs including Georgian Scroll Polished Lever Lock Door Handles plus Victorian Lever Lock Handles, available in both scroll and straight designs in brass, chrome and satin chrome finishes. Contemporary Lever Lock Door Handles are also available in chrome and satin chrome plus dual tone gunmetal, polished brass and satin nickel finishes, giving you a great choice to complete your door handle refurbishment project. Features Zamak Construction for strength. Mechanical Guarantee of 100,000 cycles. Based on 27 operational cycles every day for 10 years. Corrosion resistance finishes: Based on 72 hours salt spray test pass. To be used in combination with 64mm 3 Lever or 5 lever Sashlock of similar finish (sold separately) Product Maintenance: Low maintenance finish. Occasional cleaning with a chamois cloth recommended. Additional Information Finish - Chrome Material - Zinc Backplate Length - 152 Backplate Width - 42 Usage - Interior Box Inclusion - One Pair of Door Handles, Fixing Screws, Spindle.

Category: DIY and tools

Description: JB Kind City Black Painted Clear Glazed Internal Door The JB Kind City Black Painted Clear Glazed Internal Door is a perfect choice for the discerning buyer looking to stay on top of interior design trends. Featuring a stunning appearance derived from warehouse and factory conversions, this industrial style door really appeals to contemporary tastes and crafts an ideal visual contribution to any art deco home. Designed to mimic the sturdy steel doors of old, the JB Kind City range retains that timeless traditional panelled aesthetic but modernises, domesticates and improves upon it through the use of more natural materials used in the construction - reflecting the value that we place on being environmentally conscious where we can. The clear glass glazing enhances welcoming perceptions of spaciousness in your home by sharing natural light between physically separated rooms. Constructed using individual safety glass panes, this type of glazing is highly stable. The luxurious black painted finish compliments a wide range of interior palettes, enhancing neutral colours or breaking up and framing vast white spaces for example. You will be spoiled for choice with the versatile shade on this panel door. High-quality MDF wood manufacturing allows this black door to be lightweight yet durable in its own right as well as more affordable and much easier to install than an actual steel door. JB Kind provide a 2-year guarantee against any manufacturing defects, underlining their confidence in a long-lasting and truly worthy line of products. Additional Features Robust solid core construction frames the glazing Fully finished and ready to hang Features solid wood lock block for extra secure fittings Specialist ironmongery not required Can be fitted with standard door handles and hardware Suitable for JB Kind's pocket door system Minimal trimming (2 - 3mm) recommended to avoid negating the warranty, except: 10mm trimming allowance on bottom rail Available Sizes 1981 x 686 x 35mm (78 x 27in) 1981 x 762 x 35mm (78 x 30in) 1981 x 838 x 35mm (78 x 33in).

Category: DIY and tools

Description: JB Kind Metro Black Painted Clear Glazed Internal Door The JB Kind Metro Black Painted Clear Glazed Internal Door is a perfect choice for the discerning buyer looking to stay on top of interior design trends. Featuring a stunning appearance derived from warehouse and factory conversions, this industrial style door really appeals to contemporary tastes and crafts an ideal visual contribution to any art deco home. Designed to echo the sturdy steel doors of old, the JB Kind Metro range maintains that timeless traditional ladder aesthetic but modernises, domesticates and improves upon it by way of the natural materials used in the construction - representing the importance that we place on being environmentally conscious where possible. The luxurious black painted finish is capable of enhancing a wide range of interior palettes, enhancing neutral colours or breaking up and framing vast white spaces for example. You will be spoiled for choice with the versatile shade of this panel door. The clear glass panes allow you to spread natural light and warmth between rooms while saving on energy bills and making your home feel more spacious and welcoming. A high-quality MDF wood build allows this black door to be lightweight yet durable in its own right as well as more affordable and much easier to install than an actual steel door. JB Kind offer a 2-year guarantee against any manufacturing defects, underlining their confidence in a long-lasting and truly worthy line of products. Additional Features Robust solid core construction Fully finished and ready to hang Individual glass panes are more stable than single glass glazing Features solid wood lock block for extra secure fittings Specialist ironmongery not required Can be fitted with standard door handles and hardware Suitable for JB Kind's pocket door system Minimal trimming (2 - 3mm) recommended to avoid negating the warranty, except: 10mm trimming allowance on bottom rail Available Sizes 1981 x 686 x 35mm (78 x 27in) 1981 x 762 x 35mm (78 x 30in) 1981 x 838 x 35mm (78 x 33in).

Category: DIY and tools

Description: JB Kind City White Painted Clear Glazed Internal Door The JB Kind City White Painted Clear Glazed Internal Door is a perfect choice for the discerning buyer looking to stay on top of interior design trends. Featuring a stunning appearance derived from warehouse and factory conversions, this industrial style door really appeals to contemporary tastes and crafts an ideal visual contribution to any art deco home. Designed to mimic the sturdy steel doors of old, the JB Kind City range retains that timeless traditional panelled aesthetic but modernises, domesticates and improves upon it through the use of more natural materials used in the construction - reflecting the value that we place on being environmentally conscious where we can. The clear glass glazing enhances welcoming perceptions of spaciousness in your home by sharing natural light between physically separated rooms. Constructed using individual safety glass panes, this type of glazing is highly stable. The luxurious white painted finish compliments a wide range of interior palettes, enhancing neutral colours or breaking up and framing vast black spaces for example. You will be spoiled for choice with the versatile shade on this panel door. High-quality MDF wood manufacturing allows this white door to be lightweight yet durable in its own right as well as more affordable and much easier to install than an actual steel door. JB Kind provide a 2-year guarantee against any manufacturing defects, underlining their confidence in a long-lasting and truly worthy line of products. Additional Features Robust solid core construction frames the glazing Fully finished and ready to hang Features solid wood lock block for extra secure fittings Specialist ironmongery not required Can be fitted with standard door handles and hardware Suitable for JB Kind's pocket door system Minimal trimming (2 - 3mm) recommended to avoid negating the warranty, except: 10mm trimming allowance on bottom rail Available Sizes 1981 x 686 x 35mm (78 x 27in) 1981 x 762 x 35mm (78 x 30in) 1981 x 838 x 35mm (78 x 33in).

Category: DIY and tools

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 838 mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen W29ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W29ATHF

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 762mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off t he floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 762mm (78 inch x 30 inch) Jeld Wen W26ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W26ATHF

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 686mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen W23ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W23ATHF

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 610mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 610mm (78 inch x 24 inch) Jeld Wen W20ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W20ATHF

Description: The Atherton features a contemporary 4 panel style and comes in a variety of finishes. 4 panel contemporary style internal door Smooth faced design White undercoated finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 457mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Undercoated Internal FD30 Fire Door - 1981mm x 457mm (78 inch x 18 inch) Jeld Wen W16ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: W16ATHF

Description: 2 panel Moulded contemporary style internal door Woodgrain effect finish Primed finish, ready for your own choice of paint colour Solid fire core construction Traditional and bespoke design option available Fire doors should not be trimmed at the top as this compromises the unique traceable label Provides 30-minute resistance against the spread of fire in the home Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 686mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. JELD-WEN Camden 2 Panel White Primed Internal FD30 Fire Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen 23CMNF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 23CMNF

Description: 2 panel Moulded contemporary style internal door Woodgrain effect finish Primed finish, ready for your own choice of paint colour Solid fire core construction Traditional and bespoke design option available Fire doors should not be trimmed at the top as this compromises the unique traceable label Provides 30-minute resistance against the spread of fire in the home Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 762mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. JELD-WEN Camden 2 Panel White Primed Internal FD30 Fire Door - 1981mm x 762mm (78 inch x 30 inch) Jeld Wen 26CMNF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 26CMNF

Description: 2 panel Moulded contemporary style internal door Woodgrain effect finish Primed finish, ready for your own choice of paint colour Solid fire core construction Traditional and bespoke design option available Fire doors should not be trimmed at the top as this compromises the unique traceable label Provides 30-minute resistance against the spread of fire in the home Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 838mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. JELD-WEN Camden 2 Panel White Primed Internal FD30 Fire Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen 29CMNF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 29CMNF

Description: The cambridge white painted 2 panelled interior door has a contemporary two block design and is sound reducing. Contemporary two block design Sound reducing White primed finish, ready for final finishing coat Smooth finish Traditional and contemporary design option available Fire doors should not be trimmed at the top as this provides a unique traceable label Provides 30-minute resistance against the spread of fire in the home Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified BWF-CERTIFIRE Rated Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors must be stored flat in cool, dry conditions avoiding direct contact with sunlight before the door has been finished. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the pint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Cambridge 2 Panel White Primed Internal FD30 Fire Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen R23CAMBF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: R23CAMBF

Description: The Atherton internal moulded white primed door is a popular smooth panelled door with an enhanced bead profile to provide a traditional look. 4 panel contemporary style internal door Smooth faced design White primed finish, ready for final finishing coat Solid fire core construction Traditional design option available 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 686mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturers instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. JELD-WEN Atherton 4 Panel White Primed Internal FD30 Fire Door - 1981mm x 686mm (78 inch x 27 inch) Jeld Wen 23ATHF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 23ATHF

Description: The Bostonian 6 panel contemporary style internal door comes with 30 minutes fire rating. 6 panel contemporary style internal door Wood grain effect finish Primed finish, ready for your own choice of paint colour Solid fire core construction Traditional and bespoke design option available Fire doors should not be trimmed at the top as this provides a unique traceable label 30-minute fire rating Manufactured under the BWF-CERTIFIRE scheme 10-year guarantee FSC Certified Dimensions Width: 838mm Height: 1981mm Thickness: 44mm Technical Information Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg. Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory but we strongly recommend that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims. Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work. Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. JELD-WEN Bostonian 6 Panel White Primed Internal FD30 Fire Door - 1981mm x 838mm (78 inch x 33 inch) Jeld Wen 29BTNF - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 0.00

Delivery weight: 1kg

Colour: White

MPN: 29BTNF