Evostik Evo-stik Time Bond Contact Adhesive
358 ratings
TO EXPLORE MORE
Price: £23.95
Brand: Evostik
Description: Timebond is a high-strength, multi-purpose repositionable, non-drip adhesive, making it ideal for use on vertical and overhead surfaces. There is no need for clamps or support. Ideal for bonding wood, MDF, laminate, metal, rigid PVC, cork, leather, rubber, glass, stone, ceramics and much more. Size. 500ml Tin. Additional Information: ● Type: Non-Drip ● Size: 500ml. Evostik Evo-stik Time Bond Contact Adhesive - shop the best deal online on diy-compared.co.uk
Category: Diy
Merchant: My Tool Shed
Product ID: 2545
Delivery cost: 7.95
EAN: 5010591001497
RRP: 28.6
My website utilises affiliate links when you click my 'Get the best deal now' buttons. If you buy something through one of these links, I may earn a little commission, at no extra cost to you.
I have relationships with many of the top online retailers (purchasing, shipping and returns will be handled directly by them) which enables me to offer the best deal online for the Evostik Evo-stik Time Bond Contact Adhesive and many other similar products - which will appear below, to enhance your online shopping experience.
For even more great deals on Evostik Diy, click the link.
Author: Ewan
Rating: 5
Review: Great for personal.projects. easy to ise and sticks well
Author: Optician
Rating: 3
Review: I liked the "Thixotropic" paste like consistency. Very easy and clean to spread evenly. I cleaned, degreased, and dusted a piece of 3mm Neoprene sheet and a lump of machined flat Beech wood end grain. Applied the adhesive to both surfaces and waited 10 minutes until it was touch dry. Carefully aligned them and pushed together. First thing to note is that the word "Time" in the product name means you haven't got any!. It really does bind instantly and you cannot reposition it even a minute amount. Hmm. Anyway, after pressing the parts together I attacked them with a 2 inch hand roller, making sure both pieces were really well contacted by rolling. I put the part away in the lounge and didn't touch it for 24 hours. I then gave each corner a gentle pull and it all seemed solid. With a successful test piece I went about preparing the bunch of big wood legs that need Neoprene feet. I looked again at the test piece the next day and two of the corners had started to peel. I gave one of them a gentle pull and it peeled away for 20mm or so. Failure. The Neoprene that came away left all it's contact cement behind, it was bare of glue. I can only conclude that, unlike most contact cements, it does not self-prime Neoprene. There was no sign of chemical bonding at all. Under 10x magnification, the peeled corner of Neoprene was pristine. I won't be using it again. Ability to self-prime rubbers is a fundamental requirement of adhesives for this application, and the product name gives a false sense that you have time to work with it. Also, at £9.49 for 250ml, it works out at £37.96 per litre!!! I have since for a specic cement for Neoprene made by Diall/Bostik. It is Thixotropic, Has repositioning time before it bonds, and is entitled Neoprene cement. It is also £9.50 per litre :)