Wallbarn Diy And Tools - page 5

Description: TPE is a compound of rubber and polypropylene, developed as a cost effective way to waterproof and protect drainage holes and outlets on roofs and balconies in conjunction with bituminous waterproofing membranes. The material is tough, flexible and durable. The resilient TPE material is UV stable and resistant to deterioration by normal atmospheric elements and ground salts. It can withstand temperature of 120C and will not become brittle at very low temperatures. These outlets, collars and vents are ideal for SBS and APP bituminous membranes, including built-up (felt), mastic asphalt, hot melt and other liquid applied membranes such as Fibreglass. The circular drain connector is used for downpipes and outlets on a roof or terrace within the main body of the concrete deck. Made from TPE, these outlets are for use where a circular hole is cast into the concrete deck. The area is fully waterproofed around the hole and into the hole with a first layer /coat of membrane. The connector is then inserted into the hole, and a second coat /layer of membrane is installed on top of the flap (flange). The connectors are manufactured with a perforated flange so the membrane oozes through to bond to itself in a sandwich situation, ensuring a very secure bond. The shank s 240mm long and is designed to fit inside an HDPE pipe tightly. The shank or pipe is manufactured to a slight cone shape, making it easier to press into the hole and helping to prevent the connector rising out of the hole. There are two rings on the shank which help to ensure that as it is pressed into the hole no water can pass back up the pipe, acting as a further drain trap. At the mouth of the shank there are a series of ribs and serrations along the inside, which ensure a leaf guard or gravel-excluder can be fitted into the connector securely. The connector should not come into direct contact with the bare concrete, as this risks the chance of water passing beneath the rubber profile and ingressing into the structure. The connector sits between two layers of waterproofing. For two coat liquid applied membranes this can be achieved fairly easily without disrupting the waterproofing process. For sheet membranes the best practice is that an additional layer of membrane should be applied and adhered to the area. The first layer can be installed and fully bonded, the outlet is inserted into the hole, then a patch of membrane is fitted above and around the outlet. It should be fully bonded to the flange of the outlet and the first layer of membrane by adhesive or heat-bonding to achieve a fully watertight bond. TPE - for use with bituminous felts & asphalte. Flange with holes - perforated. Height: 240mm. Roofdrain Outlet (TPE) Perforated 240mm High - 40mm Diameter Wallbarn RO-TPE-030-050-240-040-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-030-050-240-040-Z

MPN: RO-TPE-030-050-240-040-Z

Description: TPE is a compound of rubber and polypropylene, developed as a cost effective way to waterproof and protect drainage holes and outlets on roofs and balconies in conjunction with bituminous waterproofing membranes. The material is tough, flexible and durable. The resilient TPE material is UV stable and resistant to deterioration by normal atmospheric elements and ground salts. It can withstand temperature of 120C and will not become brittle at very low temperatures. These outlets, collars and vents are ideal for SBS and APP bituminous membranes, including built-up (felt), mastic asphalt, hot melt and other liquid applied membranes such as Fibreglass. The circular drain connector is used for downpipes and outlets on a roof or terrace within the main body of the concrete deck. Made from TPE, these outlets are for use where a circular hole is cast into the concrete deck. The area is fully waterproofed around the hole and into the hole with a first layer /coat of membrane. The connector is then inserted into the hole, and a second coat /layer of membrane is installed on top of the flap (flange). The connectors are manufactured with a perforated flange so the membrane oozes through to bond to itself in a sandwich situation, ensuring a very secure bond. The shank s 240mm long and is designed to fit inside an HDPE pipe tightly. The shank or pipe is manufactured to a slight cone shape, making it easier to press into the hole and helping to prevent the connector rising out of the hole. There are two rings on the shank which help to ensure that as it is pressed into the hole no water can pass back up the pipe, acting as a further drain trap. At the mouth of the shank there are a series of ribs and serrations along the inside, which ensure a leaf guard or gravel-excluder can be fitted into the connector securely. The connector should not come into direct contact with the bare concrete, as this risks the chance of water passing beneath the rubber profile and ingressing into the structure. The connector sits between two layers of waterproofing. For two coat liquid applied membranes this can be achieved fairly easily without disrupting the waterproofing process. For sheet membranes the best practice is that an additional layer of membrane should be applied and adhered to the area. The first layer can be installed and fully bonded, the outlet is inserted into the hole, then a patch of membrane is fitted above and around the outlet. It should be fully bonded to the flange of the outlet and the first layer of membrane by adhesive or heat-bonding to achieve a fully watertight bond. TPE - for use with bituminous felts & asphalte. Flange with holes - perforated. Height: 240mm. Roofdrain Outlet (TPE) Perforated 240mm High - 200mm Diameter Wallbarn RO-TPE-030-050-240-200-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-030-050-240-200-Z

MPN: RO-TPE-030-050-240-200-Z

Description: TPE is a compound of rubber and polypropylene, developed as a cost effective way to waterproof and protect drainage holes and outlets on roofs and balconies in conjunction with bituminous waterproofing membranes. The material is tough, flexible and durable. The resilient TPE material is UV stable and resistant to deterioration by normal atmospheric elements and ground salts. It can withstand temperature of 120C and will not become brittle at very low temperatures. These outlets, collars and vents are ideal for SBS and APP bituminous membranes, including built-up (felt), mastic asphalt, hot melt and other liquid applied membranes such as Fibreglass. The circular drain connector is used for downpipes and outlets on a roof or terrace within the main body of the concrete deck. Made from TPE, these outlets are for use where a circular hole is cast into the concrete deck. The area is fully waterproofed around the hole and into the hole with a first layer /coat of membrane. The connector is then inserted into the hole, and a second coat /layer of membrane is installed on top of the flap (flange). The connectors are manufactured with a perforated flange so the membrane oozes through to bond to itself in a sandwich situation, ensuring a very secure bond. The shank s 240mm long and is designed to fit inside an HDPE pipe tightly. The shank or pipe is manufactured to a slight cone shape, making it easier to press into the hole and helping to prevent the connector rising out of the hole. There are two rings on the shank which help to ensure that as it is pressed into the hole no water can pass back up the pipe, acting as a further drain trap. At the mouth of the shank there are a series of ribs and serrations along the inside, which ensure a leaf guard or gravel-excluder can be fitted into the connector securely. The connector should not come into direct contact with the bare concrete, as this risks the chance of water passing beneath the rubber profile and ingressing into the structure. The connector sits between two layers of waterproofing. For two coat liquid applied membranes this can be achieved fairly easily without disrupting the waterproofing process. For sheet membranes the best practice is that an additional layer of membrane should be applied and adhered to the area. The first layer can be installed and fully bonded, the outlet is inserted into the hole, then a patch of membrane is fitted above and around the outlet. It should be fully bonded to the flange of the outlet and the first layer of membrane by adhesive or heat-bonding to achieve a fully watertight bond. TPE - for use with bituminous felts & asphalte. Flange with holes - perforated. Height: 240mm. Roofdrain Outlet (TPE) Perforated 240mm High - 140mm Diameter Wallbarn RO-TPE-030-050-240-140-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-030-050-240-140-Z

MPN: RO-TPE-030-050-240-140-Z

Description: TPE is a compound of rubber and polypropylene, developed as a cost effective way to waterproof and protect drainage holes and outlets on roofs and balconies in conjunction with bituminous waterproofing membranes. The material is tough, flexible and durable. The resilient TPE material is UV stable and resistant to deterioration by normal atmospheric elements and ground salts. It can withstand temperature of 120C and will not become brittle at very low temperatures. These outlets, collars and vents are ideal for SBS and APP bituminous membranes, including built-up (felt), mastic asphalt, hot melt and other liquid applied membranes such as Fibreglass. The circular drain connector is used for downpipes and outlets on a roof or terrace within the main body of the concrete deck. Made from TPE, these outlets are for use where a circular hole is cast into the concrete deck. The area is fully waterproofed around the hole and into the hole with a first layer /coat of membrane. The connector is then inserted into the hole, and a second coat /layer of membrane is installed on top of the flap (flange). The connectors are manufactured with a perforated flange so the membrane oozes through to bond to itself in a sandwich situation, ensuring a very secure bond. The shank s 240mm long and is designed to fit inside an HDPE pipe tightly. The shank or pipe is manufactured to a slight cone shape, making it easier to press into the hole and helping to prevent the connector rising out of the hole. There are two rings on the shank which help to ensure that as it is pressed into the hole no water can pass back up the pipe, acting as a further drain trap. At the mouth of the shank there are a series of ribs and serrations along the inside, which ensure a leaf guard or gravel-excluder can be fitted into the connector securely. The connector should not come into direct contact with the bare concrete, as this risks the chance of water passing beneath the rubber profile and ingressing into the structure. The connector sits between two layers of waterproofing. For two coat liquid applied membranes this can be achieved fairly easily without disrupting the waterproofing process. For sheet membranes the best practice is that an additional layer of membrane should be applied and adhered to the area. The first layer can be installed and fully bonded, the outlet is inserted into the hole, then a patch of membrane is fitted above and around the outlet. It should be fully bonded to the flange of the outlet and the first layer of membrane by adhesive or heat-bonding to achieve a fully watertight bond. TPE - for use with bituminous felts & asphalte. Flange with holes - perforated. Height: 240mm. Roofdrain Outlet (TPE) Perforated 240mm High - 125mm Diameter Wallbarn RO-TPE-030-050-240-125-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-030-050-240-125-Z

MPN: RO-TPE-030-050-240-125-Z

Description: TPE is a compound of rubber and polypropylene, developed as a cost effective way to waterproof and protect drainage holes and outlets on roofs and balconies in conjunction with bituminous waterproofing membranes. The material is tough, flexible and durable. The resilient TPE material is UV stable and resistant to deterioration by normal atmospheric elements and ground salts. It can withstand temperature of 120C and will not become brittle at very low temperatures. These outlets, collars and vents are ideal for SBS and APP bituminous membranes, including built-up (felt), mastic asphalt, hot melt and other liquid applied membranes such as Fibreglass. The circular drain connector is used for downpipes and outlets on a roof or terrace within the main body of the concrete deck. Made from TPE, these outlets are for use where a circular hole is cast into the concrete deck. The area is fully waterproofed around the hole and into the hole with a first layer /coat of membrane. The connector is then inserted into the hole, and a second coat /layer of membrane is installed on top of the flap (flange). The connectors are manufactured with a perforated flange so the membrane oozes through to bond to itself in a sandwich situation, ensuring a very secure bond. The shank s 240mm long and is designed to fit inside an HDPE pipe tightly. The shank or pipe is manufactured to a slight cone shape, making it easier to press into the hole and helping to prevent the connector rising out of the hole. There are two rings on the shank which help to ensure that as it is pressed into the hole no water can pass back up the pipe, acting as a further drain trap. At the mouth of the shank there are a series of ribs and serrations along the inside, which ensure a leaf guard or gravel-excluder can be fitted into the connector securely. The connector should not come into direct contact with the bare concrete, as this risks the chance of water passing beneath the rubber profile and ingressing into the structure. The connector sits between two layers of waterproofing. For two coat liquid applied membranes this can be achieved fairly easily without disrupting the waterproofing process. For sheet membranes the best practice is that an additional layer of membrane should be applied and adhered to the area. The first layer can be installed and fully bonded, the outlet is inserted into the hole, then a patch of membrane is fitted above and around the outlet. It should be fully bonded to the flange of the outlet and the first layer of membrane by adhesive or heat-bonding to achieve a fully watertight bond. TPE - for use with bituminous felts & asphalte. Flange with holes - perforated. Height: 240mm. Roofdrain Outlet (TPE) Perforated 240mm High - 110mm Diameter Wallbarn RO-TPE-030-050-240-110-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-030-050-240-110-Z

MPN: RO-TPE-030-050-240-110-Z

Description: TPE is a compound of rubber and polypropylene, developed as a cost effective way to waterproof and protect drainage holes and outlets on roofs and balconies in conjunction with bituminous waterproofing membranes. The material is tough, flexible and durable. The resilient TPE material is UV stable and resistant to deterioration by normal atmospheric elements and ground salts. It can withstand temperature of 120C and will not become brittle at very low temperatures. These outlets, collars and vents are ideal for SBS and APP bituminous membranes, including built-up (felt), mastic asphalt, hot melt and other liquid applied membranes such as Fibreglass. The circular drain connector is used for downpipes and outlets on a roof or terrace within the main body of the concrete deck. Made from TPE, these outlets are for use where a circular hole is cast into the concrete deck. The area is fully waterproofed around the hole and into the hole with a first layer /coat of membrane. The connector is then inserted into the hole, and a second coat /layer of membrane is installed on top of the flap (flange). The connectors are manufactured with a perforated flange so the membrane oozes through to bond to itself in a sandwich situation, ensuring a very secure bond. The shank s 240mm long and is designed to fit inside an HDPE pipe tightly. The shank or pipe is manufactured to a slight cone shape, making it easier to press into the hole and helping to prevent the connector rising out of the hole. There are two rings on the shank which help to ensure that as it is pressed into the hole no water can pass back up the pipe, acting as a further drain trap. At the mouth of the shank there are a series of ribs and serrations along the inside, which ensure a leaf guard or gravel-excluder can be fitted into the connector securely. The connector should not come into direct contact with the bare concrete, as this risks the chance of water passing beneath the rubber profile and ingressing into the structure. The connector sits between two layers of waterproofing. For two coat liquid applied membranes this can be achieved fairly easily without disrupting the waterproofing process. For sheet membranes the best practice is that an additional layer of membrane should be applied and adhered to the area. The first layer can be installed and fully bonded, the outlet is inserted into the hole, then a patch of membrane is fitted above and around the outlet. It should be fully bonded to the flange of the outlet and the first layer of membrane by adhesive or heat-bonding to achieve a fully watertight bond. TPE - for use with bituminous felts & asphalte. Flange with holes - perforated. Height: 240mm. Roofdrain Outlet (TPE) Perforated 240mm High - 100mm Diameter Wallbarn RO-TPE-030-050-240-100-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-030-050-240-100-Z

MPN: RO-TPE-030-050-240-100-Z

Description: Roofdrain Outlet (TPE) - 160mm TPE For Use With Bituminous Felts & Asphalte Flange With Holes Height: 240mm. Roofdrain Outlet (TPE) - 160mm Wallbarn RO-TPE-030-050-240-160-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-030-050-240-160-Z

MPN: RO-TPE-030-050-240-160-Z

Description: PVC Circular Roof Outlet with Smooth Flange to suit 40mm Pipe Dimensions Height: 240mm. PVC Circular Roof Outlet with Smooth Flange to suit 40mm Pipe (White) Wallbarn RO-PVC-120-040-240-040-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 10-14 Working Days

Delivery cost: 10.20

Model number: RO-PVC-120-040-240-040-Z

MPN: RO-PVC-120-040-240-040-Z

Description: PVC Circular Roof Outlet with Smooth Flange to suit 160mm Pipe Dimensions Height: 240mm. Diameter: 160mm. Wallbarn PVC Circular Roof Outlet with Smooth Flange to suit 100mm Pipe (White) - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 10-15 Working Days

Delivery cost: 10.20

Model number: RO-PVC-120-040-240-160-Z

MPN: RO-PVC-120-040-240-160-Z

Description: PVC Circular Roof Outlet with Smooth Flange to suit 100mm Pipe Dimensions Height: 240mm. Diameter: 100mm. PVC Circular Roof Outlet with Smooth Flange to suit 100mm Pipe (White) Wallbarn RO-PVC-120-040-240-100-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-PVC-120-040-240-100-Z

MPN: RO-PVC-120-040-240-100-Z

Description: Pack Contains 3m of Locking Channel Drainage and an accessories pack Dimensions 120mm Deep 135mm Wide 90mm Invert Depth 100mm Invert Width Description It is designed to collect surface water off paved or asphalted areas and move that water away towards an underground drainpipe or escape route. The anti-slip, hardwearing galvanised steel grate maintains structural integrity across the area, so foot traffic and very light vehicles can pass over the drain without issue. It has many applications: domestic applications; such as driveways, gardens & patios public areas; such as pedestrian walkways, door thresholds, squares, recreational areas, schools, parks and playing fields. Our drainage channel is CE marked and fully certified to Load Class A15 BS EN 1433. It is eco-friendly and 100% recyclable. The Protecto-drain Drainage Channel is designed to be installed quickly and easily. It simply slots in front of the building entrance or within the paved /asphalt area and provides an un-obstructed channel cross-section. Each individual channel clips together for fast and simple on-site fabrication. It is very easy to cut on areas where a part-metre length is required. All slots and measurement grooves run the whole way through the channel so side bars can also be installed into cut channels successfully. This 1 metre long fully assembled drainage channel has an integrated steel grid and the ingenious locking clip system, meaning it can be easily opened for inspection or cleaning. Locking A15 Channel Drainage Garage Pack 3m - Wallbarn Protecto Drain Plastic PD-CHANNEL-0300-PACK-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 8.40

Model number: PD-CHANNEL-0300-Z

MPN: PD-CHANNEL-0300-PACK-Z

Description: Made from polypropylene, it is equipped with a sturdy cage on the top with strong side bars and slats for the water to drain through. Helix spoke (with three wide spokes); Allows for installers to trim the spokes back easily using a sharp knife to fit the diameter of the outlet holes perfectly. Dimensions (mm) - see image D1 208mm D2 230mm H 50mm H1 220mm. Helix Gravel Guard Plastic Wallbarn RO-LEAFGUARD-210-030-075-200-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-210-030-075-200-Z

MPN: RO-LEAFGUARD-210-030-075-200-Z

Description: Wallbarn extension shanks are designed to fix up with the drainage outlets to increase the reach into the parapet wall or drainage channel. Often the ducts and channels will have to pass through a long run of concrete before reaching a suitable area to install the HDPE drainpipe, so an extension of a fully waterproof sealed connector will be required. These extension shanks are specially designed to fit in with the full range of Wallbarn circular outlets. They are made from TPE but can still be used with EPDM and PVC outlets. They are manufactured to a slight cone shape, so the end of the circular outlet slots inside the top of the extension shank. The two membranes are bonded together using silicone adhesive. FOR HDPE PIPE 111 106 116 240. Please note: Installers of PVC waterproofing systems should always inform waterproofing manufacturer before using these two materials together in order check the status of the warranty. Length: 240mm. Extension Shank / Pipe 240mm Long - 90mm Diameter TPE Wallbarn RO-TPE-210-040-240-090-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-210-040-240-090-Z

MPN: RO-TPE-210-040-240-090-Z

Description: Wallbarn extension shanks are designed to fix up with the drainage outlets to increase the reach into the parapet wall or drainage channel. Often the ducts and channels will have to pass through a long run of concrete before reaching a suitable area to install the HDPE drainpipe, so an extension of a fully waterproof sealed connector will be required. These extension shanks are specially designed to fit in with the full range of Wallbarn circular outlets. They are made from TPE but can still be used with EPDM and PVC outlets. They are manufactured to a slight cone shape, so the end of the circular outlet slots inside the top of the extension shank. The two membranes are bonded together using silicone adhesive. FOR HDPE PIPE 111 106 116 240. Please note: Installers of PVC waterproofing systems should always inform waterproofing manufacturer before using these two materials together in order check the status of the warranty. Please also note the TPE needs to be smaller than the HDPE drainpipe. Dimensions Length: 240mm. Outer diameter of the pipe at the top: 74mm. Inner diameter of the pipe at the top­: 69mm. Inner diameter of the pipe at the bottom: 64mm. Extension Shank / Pipe 240mm Long - 80mm Diameter TPE Wallbarn RO-TPE-210-040-240-080-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-210-040-240-080-Z

MPN: RO-TPE-210-040-240-080-Z

Description: Wallbarn extension shanks are designed to fix up with the drainage outlets to increase the reach into the parapet wall or drainage channel. Often the ducts and channels will have to pass through a long run of concrete before reaching a suitable area to install the HDPE drainpipe, so an extension of a fully waterproof sealed connector will be required. These extension shanks are specially designed to fit in with the full range of Wallbarn circular outlets. They are made from TPE but can still be used with EPDM and PVC outlets. They are manufactured to a slight cone shape, so the end of the circular outlet slots inside the top of the extension shank. The two membranes are bonded together using silicone adhesive. FOR HDPE PIPE 111 106 116 240. Please note: Installers of PVC waterproofing systems should always inform waterproofing manufacturer before using these two materials together in order check the status of the warranty. Length: 240mm. Extension Shank / Pipe 240mm Long - 75mm Diameter TPE Wallbarn RO-TPE-210-040-240-075-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-210-040-240-075-Z

MPN: RO-TPE-210-040-240-075-Z

Description: Wallbarn extension shanks are designed to fix up with the drainage outlets to increase the reach into the parapet wall or drainage channel. Often the ducts and channels will have to pass through a long run of concrete before reaching a suitable area to install the HDPE drainpipe, so an extension of a fully waterproof sealed connector will be required. These extension shanks are specially designed to fit in with the full range of Wallbarn circular outlets. They are made from TPE but can still be used with EPDM and PVC outlets. They are manufactured to a slight cone shape, so the end of the circular outlet slots inside the top of the extension shank. The two membranes are bonded together using silicone adhesive. FOR HDPE PIPE 111 106 116 240. Please note: Installers of PVC waterproofing systems should always inform waterproofing manufacturer before using these two materials together in order check the status of the warranty. Length: 240mm. Extension Shank / Pipe 240mm Long - 60mm Diameter TPE Wallbarn RO-TPE-210-040-240-060-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-210-040-240-060-Z

MPN: RO-TPE-210-040-240-060-Z

Description: Wallbarn extension shanks are designed to fix up with the drainage outlets to increase the reach into the parapet wall or drainage channel. Often the ducts and channels will have to pass through a long run of concrete before reaching a suitable area to install the HDPE drainpipe, so an extension of a fully waterproof sealed connector will be required. These extension shanks are specially designed to fit in with the full range of Wallbarn circular outlets. They are made from TPE but can still be used with EPDM and PVC outlets. They are manufactured to a slight cone shape, so the end of the circular outlet slots inside the top of the extension shank. The two membranes are bonded together using silicone adhesive. FOR HDPE PIPE 111 106 116 240. Please note: Installers of PVC waterproofing systems should always inform waterproofing manufacturer before using these two materials together in order check the status of the warranty. Length: 240mm. Extension Shank / Pipe 240mm Long - 40mm Diameter TPE Wallbarn RO-TPE-210-040-240-040-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-210-040-240-040-Z

MPN: RO-TPE-210-040-240-040-Z

Description: Wallbarn extension shanks are designed to fix up with the drainage outlets to increase the reach into the parapet wall or drainage channel. Often the ducts and channels will have to pass through a long run of concrete before reaching a suitable area to install the HDPE drainpipe, so an extension of a fully waterproof sealed connector will be required. These extension shanks are specially designed to fit in with the full range of Wallbarn circular outlets. They are made from TPE but can still be used with EPDM and PVC outlets. They are manufactured to a slight cone shape, so the end of the circular outlet slots inside the top of the extension shank. The two membranes are bonded together using silicone adhesive. FOR HDPE PIPE 111 106 116 240. Please note: Installers of PVC waterproofing systems should always inform waterproofing manufacturer before using these two materials together in order check the status of the warranty. Length: 240mm. Extension Shank / Pipe 240mm Long - 125mm Diameter TPE Wallbarn RO-TPE-210-040-240-125-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-210-040-240-125-Z

MPN: RO-TPE-210-040-240-125-Z

Description: Wallbarn extension shanks are designed to fix up with the drainage outlets to increase the reach into the parapet wall or drainage channel. Often the ducts and channels will have to pass through a long run of concrete before reaching a suitable area to install the HDPE drainpipe, so an extension of a fully waterproof sealed connector will be required. These extension shanks are specially designed to fit in with the full range of Wallbarn circular outlets. They are made from TPE but can still be used with EPDM and PVC outlets. They are manufactured to a slight cone shape, so the end of the circular outlet slots inside the top of the extension shank. The two membranes are bonded together using silicone adhesive. FOR HDPE PIPE 111 106 116 240. Please note: Installers of PVC waterproofing systems should always inform waterproofing manufacturer before using these two materials together in order check the status of the warranty. Length: 240mm. Extension Shank / Pipe 240mm Long - 110mm Diameter TPE Wallbarn RO-TPE-210-040-240-110-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-210-040-240-110-Z

MPN: RO-TPE-210-040-240-110-Z

Description: Wallbarn extension shanks are designed to fix up with the drainage outlets to increase the reach into the parapet wall or drainage channel. Often the ducts and channels will have to pass through a long run of concrete before reaching a suitable area to install the HDPE drainpipe, so an extension of a fully waterproof sealed connector will be required. These extension shanks are specially designed to fit in with the full range of Wallbarn circular outlets. They are made from TPE but can still be used with EPDM and PVC outlets. They are manufactured to a slight cone shape, so the end of the circular outlet slots inside the top of the extension shank. The two membranes are bonded together using silicone adhesive. FOR HDPE PIPE 111 106 116 240. Please note: Installers of PVC waterproofing systems should always inform waterproofing manufacturer before using these two materials together in order check the status of the warranty. Length: 240mm. Extension Shank / Pipe 240mm Long - 100mm Diameter TPE Wallbarn RO-TPE-210-040-240-100-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 10.20

Model number: RO-TPE-210-040-240-100-Z

MPN: RO-TPE-210-040-240-100-Z