Wallbarn Diy And Tools - page 1

Description: These Universal Extra pedestals by Wallbarn give installers greater flexibility when working across surfaces with very large differences in deck level as the height range is far greater across just three products: 85mm-135mm, 125mm-215mm and 210mm-380mm. This is due to each Extra pedestal coming complete with an extension shank which clicks into the baseplate. The threaded stem is then placed into the top of it. Typically, installers cannot always be sure how much the fall will be on the roof or where it will be, these pedestals have heights marked out every 10mm on the sides of the stems. This saves time, not having to frequently remeasure as you can see the height at a glance. Wallbarn’s Universal Extra pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal Extra adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface Being a suspended system, the weight of the slab holds everything in place Height adjustments can be made whilst the slab is in place, saving time and labour 10mm high lugs mean they are ideal for supporting thin tiles Lugs can be snapped by hand for stretcher bond and irregular laying patterns Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly Pedestals are adjusted to accommodate the fall in the roof deck Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings Height adjustments can be made whilst the timber joist framework is in place, saving time and labour Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 85mm to 135mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Extra Adjustable 85mm - 135mm Paving and Decking Support SP-UNIVERSAL-EXTRA-085-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-EXTRA-085-Z

MPN: SP-UNIVERSAL-EXTRA-085-Z

Description: These Universal Extra pedestals by Wallbarn give installers greater flexibility when working across surfaces with very large differences in deck level as the height range is far greater across just three products: 85mm-135mm, 125mm-215mm and 210mm-380mm. This is due to each Extra pedestal coming complete with an extension shank which clicks into the baseplate. The threaded stem is then placed into the top of it. Typically, installers cannot always be sure how much the fall will be on the roof or where it will be, these pedestals have heights marked out every 10mm on the sides of the stems. This saves time, not having to frequently remeasure as you can see the height at a glance. Wallbarn’s Universal Extra pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal Extra adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface Being a suspended system, the weight of the slab holds everything in place Height adjustments can be made whilst the slab is in place, saving time and labour 10mm high lugs mean they are ideal for supporting thin tiles Lugs can be snapped by hand for stretcher bond and irregular laying patterns Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly Pedestals are adjusted to accommodate the fall in the roof deck Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings Height adjustments can be made whilst the timber joist framework is in place, saving time and labour Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 210mm to 380mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Extra Adjustable 210mm - 380mm Paving and Decking Support SP-UNIVERSAL-EXTRA-210-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 7-10 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-EXTRA-210-Z

MPN: SP-UNIVERSAL-EXTRA-210-Z

Description: These Universal Extra pedestals by Wallbarn give installers greater flexibility when working across surfaces with very large differences in deck level as the height range is far greater across just three products: 85mm-135mm, 125mm-215mm and 210mm-380mm. This is due to each Extra pedestal coming complete with an extension shank which clicks into the baseplate. The threaded stem is then placed into the top of it. Typically, installers cannot always be sure how much the fall will be on the roof or where it will be, these pedestals have heights marked out every 10mm on the sides of the stems. This saves time, not having to frequently remeasure as you can see the height at a glance. Wallbarn’s Universal Extra pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal Extra adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface Being a suspended system, the weight of the slab holds everything in place Height adjustments can be made whilst the slab is in place, saving time and labour 10mm high lugs mean they are ideal for supporting thin tiles Lugs can be snapped by hand for stretcher bond and irregular laying patterns Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly Pedestals are adjusted to accommodate the fall in the roof deck Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings Height adjustments can be made whilst the timber joist framework is in place, saving time and labour Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 125mm to 215mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Extra Adjustable 125mm - 215mm Paving and Decking Support SP-UNIVERSAL-EXTRA-125-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-EXTRA-125-Z

MPN: SP-UNIVERSAL-EXTRA-125-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 95mm to 130mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 95mm - 130mm Paving and Decking Support SP-UNIVERSAL-095-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-095-Z

MPN: SP-UNIVERSAL-095-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 65mm to 100mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 65mm - 100mm Paving and Decking Support SP-UNIVERSAL-065-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-065-Z

MPN: SP-UNIVERSAL-065-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 50mm to 70mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 50mm - 70mm Paving and Decking Support SP-UNIVERSAL-050-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-050-Z

MPN: SP-UNIVERSAL-050-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 35mm to 50mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 35mm - 50mm Paving and Decking Support SP-UNIVERSAL-035-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-035-Z

MPN: SP-UNIVERSAL-035-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 330mm to 365mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 330mm - 365mm Paving and Decking Support SP-UNIVERSAL-330-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-330-Z

MPN: SP-UNIVERSAL-330-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 300mm to 335mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 300mm - 335mm Paving and Decking Support SP-UNIVERSAL-300-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-300-Z

MPN: SP-UNIVERSAL-300-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 270mm to 305mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 270mm - 305mm Paving and Decking Support SP-UNIVERSAL-270-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-270-Z

MPN: SP-UNIVERSAL-270-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 240mm to 275mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 240mm - 275mm Paving and Decking Support SP-UNIVERSAL-240-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-240-Z

MPN: SP-UNIVERSAL-240-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 210mm to 245mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 210mm - 245mm Paving and Decking Support SP-UNIVERSAL-210-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-210-Z

MPN: SP-UNIVERSAL-210-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 185mm to 220mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 185mm - 220mm Paving and Decking Support SP-UNIVERSAL-185-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-185-Z

MPN: SP-UNIVERSAL-185-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 155mm to 190mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 155mm - 190mm Paving and Decking Support SP-UNIVERSAL-155-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-155-Z

MPN: SP-UNIVERSAL-155-Z

Description: Wallbarn’s Universal pedestals are a freestanding system that create a cavity between the decking/paving surface and sub-deck, this allows obstacles such as pipes and cables to be concealed and out of the way and keeps it ventilated. This means that no fixings are made through the membrane underneath, this is ideal for warm roofs and inverted waterproofing systems. They also come with an integrated acoustic shim on the headpiece. Even flat roofs are built to a small fall to allow adequate drainage. Their durable adjustable pedestals have a telescopic stem which allow you to make millimetre-precise manual adjustments in height in order to achieve a flat upper surface. Wallbarn’s Universal adjustable pedestal range is suitable for both paving and decking. They are particularly ideal for porcelain tiles on flat roofs and podiums and are available in heights from 35mm up to 380mm. Laying decking Adjusting the height of the pedestals, rather than cutting furring’s means installers can install decking onto structural decks much more quickly. Pedestals are adjusted to accommodate the fall in the roof deck. Placed a maximum of 600mm apart, the joist bearers are simply slotted between the joist holders. A joist framework is constructed to create a sturdy, stable, weight-bearing surface to take the upper surfacing. The top decking is then fixed onto the joists using ordinary wood screws or hidden fixings. Height adjustments can be made whilst the timber joist framework is in place, saving time and labour. Paving applications Positioning lugs create uniform spacing between each slab, allowing rainwater to run between and under the slabs, so no standing water is left on the surface. As it is a suspended system, the weight of the slab is what holds everything in place. If required, any height adjustments can be made whilst the slab is in place. This saves on labour and time. As the lugs are 10mm high, they are ideal for supporting thin or thicker tiles. Lugs can be snapped by hand for stretcher bond and irregular laying patterns. Raising the decking off the sub-deck allows water to drain freely under the decking so there is no standing water left on the surface, preventing ponding and associated slip hazards, and extending the lifespan of the timber. Joists are not standing directly on the waterproofing membrane, or insulation, preventing damage to it. Product Specification Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour: 6,700N 683kg Compressive Strength: 20°C and - 40°C Max Temperature: 75° C Min Temperature: -40°C Base Plate Diameter: 200mm Height: 125mm to 160mm Headpiece Diameter: 120mm Lug Dimensions: 10mm x 2mm (4mm available upon request) Distance between lugs: 55mm. Wallbarn Universal Adjustable 125mm - 160mm Paving and Decking Support SP-UNIVERSAL-125-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-UNIVERSAL-125-Z

MPN: SP-UNIVERSAL-125-Z

Description: Wallbarn’s TD Minipads are designed to hold suspended timber decking systems on areas with very tiny height thresholds. They support timber joists, which create a framework on which decking boards are mechanically fastened. Even flat roofs are built to a fall to allow adequate drainage. TD Minipads help to achieve a better aesthetic when building decking surfaces by allowing flatter upper surfaces but allowing rainwater to drain between and under the deck boards and timber joists. This means there is less standing water on the surface. The cavity created helps to ventilate the structure and as no timber is left in permanent standing water, the lifespan of the decking is extended. The cavity also allows services such as pipes and cables to be hidden from view. Wallbarn has the largest range of height of pedestals in the UK. Specifications Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour at: 6,700N 683kg Max Temperature: Plus 75° C Min Temperature: Minus 40°C Base Plate Diameter: 150mm Headpiece Diameter: 150mm Distance Between Lugs /Fins: 60mm Height of Fins: 16mm. Wallbarn TD Minipad Adjustable Support Pad - 28mm to 37mm SP-TD-MEG-028-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-TD-MEG-028-Z

MPN: SP-TD-MEG-028-Z

Description: The 22-30mm TD Minipad has been designed for use when working with very tight spaces. The thread allows 5mm of change to the level with a 5mm extension plate which is fitted to the bottom of the pedestal. Wallbarn’s TD Minipads are special smaller height pedestals suitable for suspended timber decking systems. They have been developed for customers who require a solution to areas where restricted and very low height thresholds exist but still minor alteration of height is still required to achieve completely flat and seamless finish. Wallbarn has the greatest range of height of pedestals in the UK. TD Minipads are manufactured from polypropylene and can tolerate 683kg in weight per unit. They will not become brittle in low temperatures. Minipads have been tested using the CATAS procedure for Compressive Strength at 20°C and - 40°C. See technical data below for details. A range of different slope correctors, levelling shims and accessories are available for use with TD Minipads from Wallbarn. Product Specifications Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour at: 6,700N 683kg Max Temperature: Plus 75° C Min Temperature: Minus 40°C Base Plate Diameter: 150mm Headpiece Diameter: 150mm Height of Lug /Fin: 16mm Distance between Lugs /Fins: 60mm. Wallbarn TD Minipad Adjustable Support Pad - 22mm to 30mm SP-TD-MEG-022-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-TD-MEG-022-Z

MPN: SP-TD-MEG-022-Z

Description: The 10-25mm TD Minipad has been designed for use when working with very tight spaces. The thread allows 5mm of change to the level with a 5mm extension plate which is fitted to the bottom of the pedestal. Wallbarn’s TD Minipads are special smaller height pedestals suitable for suspended timber decking systems. They have been developed for customers who require a solution to areas where restricted and very low height thresholds exist but still minor alteration of height is still required to achieve completely flat and seamless finish. TD Minipads are manufactured from polypropylene and can tolerate 683kg in weight per unit. They will not become brittle in low temperatures. Minipads have been tested using the CATAS procedure for Compressive Strength at 20°C and - 40°C. See technical data below for details. Features & Benefits Semi-suspended system Telescopic stems Handle grip incorporated into the design Fast and easy to install Millimetre precise adjustments in height A range of different slope correctors, levelling shims and accessories are available for use with TD Minipads from Wallbarn. Product Specifications Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour at: 6,700N 683kg Max Temperature: Plus 75° C Min Temperature: Minus 40°C Base Plate Diameter: 150mm Headpiece Diameter: 150mm Height of Lug /Fin: 16mm Distance between Lugs /Fins: 60mm. Wallbarn TD Minipad Adjustable Support Pad - 10mm to 25mm SP-TD-MEG-010-025-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-TD-MEG-010-025-Z

MPN: SP-TD-MEG-010-025-Z

Description: The 10-20mm TD Minipad has been designed for use when working with very tight spaces. The thread allows 5mm of change to the level with a 5mm extension plate which is fitted to the bottom of the pedestal. Wallbarn’s TD Minipads are special smaller height pedestals suitable for suspended timber decking systems. They have been developed for customers who require a solution to areas where restricted and very low height thresholds exist but still minor alteration of height is still required to achieve completely flat and seamless finish. Wallbarn has the greatest range of height of pedestals in the UK. TD Minipads are manufactured from polypropylene and can tolerate 683kg in weight per unit. They will not become brittle in low temperatures. Minipads have been tested using the CATAS procedure for Compressive Strength at 20°C and - 40°C. See technical data below for details. A range of different slope correctors, levelling shims and accessories are available for use with TD Minipads from Wallbarn. Product Specifications Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 11,493 N 1,171kg End of Linear Behaviour at: 6,700N 683kg Max Temperature: Plus 75° C Min Temperature: Minus 40°C Base Plate Diameter: 150mm Headpiece Diameter: 150mm Height of Lug /Fin: 16mm Distance between Lugs /Fins: 60mm. Wallbarn TD Minipad Adjustable Support Pad - 10mm to 20mm SP-TD-MEG-010-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-TD-MEG-010-Z

MPN: SP-TD-MEG-010-Z

Description: TD Megapads help to achieve a better aesthetic when building decking surfaces by allowing flatter upper surfaces but allowing rainwater to drain between and under the deck boards and timber joists. This means there is less standing water on the surface. The cavity created helps to ventilate the structure and as no timber is left in permanent standing water, the lifespan of the decking is extended. The cavity also allows services such as pipes and cables to be hidden from view. Wallbarn recommends that TD Megapads should be positioned a maximum of 600mm apart. This is a semi-suspended system – the timber joists will sit between 60mm wide positioning lugs /fins. The joists should be strong enough to support the decking and the weight of any traffic /furniture. The joists should be connected to form a grid framework and the deck boards – the surface – should be mechanically fixed to the frame. Changes to height can be made whilst the timber joists are in place. This means less cutting of timber as the pedestals adjust to fit the levels, which saves a great deal of mess, time and labour during installation. TD Megapads are available in heights from 35mm up to 1,020mm. They are manufactured from polypropylene and can tolerate 2 tonnes in weight per unit. They will not become brittle in low temperatures. Megapads have been tested using the CATAS procedure for Compressive Strength at 20°C and - 40°C. See technical data below for details. A range of different lug size, slope correctors, levelling shims and accessories are available for use with TD Megapads from Wallbarn. Product Specifications Material: Virgin fibre injection moulded polypropylene Weight Tolerance: Maximum Load 20,713 N 2,057kg End of Linear Behaviour at: 15,300N 1,560kg Max Temperature: Plus 75° C Min Temperature: Minus 40°C Base Plate Diameter: 200mm Headpiece Diameter: 150mm Distance Between Lugs /Fins: 60mm Height of Fins: 18.5mm. Wallbarn TD Megapad Adjustable Support Pad - 915mm to 1020mm SP-TD-MEG-915-Z - shop the best deal online on diy-compared.co.uk

Category: DIY and tools

Delivery time: 1-2 Working Days

Delivery cost: 18.00

Model number: SP-TD-MEG-915-Z

MPN: SP-TD-MEG-915-Z